Items where Subject is "Metrology"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | Keywords
Number of items at this level: 41.

3D printing

The effect of layer thickness on repeatability of 3D printed PLA parts produced using openware 3D printer. IIUM Engineering Journal, 23 (2). pp. 218-227. ISSN 1511-788X (2022)

3D scanning

Three dimension scanning using infrared coded light. ELEKTRIKA- Journal of Electrical Engineering, 19 (2). pp. 46-52. ISSN 0128-4428 (2020)

Accelerometer

Pavement condition analysis via vehicle mounted accelerometer data. IIUM Engineering Journal, 21 (1). pp. 73-84. ISSN 1511-788X (2020)

Accurate measurement

Don’t make Malaysia dumping ground for poor quality products, says minister. [Newspaper] (2019)

Asia-Pacific Legal Metrology Forum (APLMF)

Malaysian chosen to lead Asia Pacific Legal Metrology grouping. [Newspaper] (2021)

Deep hole drilling

Optimization of surface roughness in deep hole drilling using moth-flame optimization. ELEKTRIKA- Journal of Electrical Engineering, 18 (3-2). pp. 62-68. ISSN 0128-4428 (2019)

Electric discharge machining

Modeling and optimization of electric discharge machining performances using harmony search algorithm. ELEKTRIKA- Journal of Electrical Engineering, 18 (3-2). pp. 56-61. ISSN 0128-4428 (2019)

Electrode wear rate

Modeling and optimization of electric discharge machining performances using harmony search algorithm. ELEKTRIKA- Journal of Electrical Engineering, 18 (3-2). pp. 56-61. ISSN 0128-4428 (2019)

Envelope detection

Pavement condition analysis via vehicle mounted accelerometer data. IIUM Engineering Journal, 21 (1). pp. 73-84. ISSN 1511-788X (2020)

Fused Filament Fabrication (FFF)

The effect of layer thickness on repeatability of 3D printed PLA parts produced using openware 3D printer. IIUM Engineering Journal, 23 (2). pp. 218-227. ISSN 1511-788X (2022)

Harmony search

Modeling and optimization of electric discharge machining performances using harmony search algorithm. ELEKTRIKA- Journal of Electrical Engineering, 18 (3-2). pp. 56-61. ISSN 0128-4428 (2019)

Infrared coded light

Three dimension scanning using infrared coded light. ELEKTRIKA- Journal of Electrical Engineering, 19 (2). pp. 46-52. ISSN 0128-4428 (2020)

International System of Units

Malaysian chosen to lead Asia Pacific Legal Metrology grouping. [Newspaper] (2021)

Iterative closest point (ICP)

Three dimension scanning using infrared coded light. ELEKTRIKA- Journal of Electrical Engineering, 19 (2). pp. 46-52. ISSN 0128-4428 (2020)

Keselamatan pengguna

Elak pasaran domestik jadi tempat lambakan produk tidak berkualiti. [Newspaper] (2019)

Layer thickness

The effect of layer thickness on repeatability of 3D printed PLA parts produced using openware 3D printer. IIUM Engineering Journal, 23 (2). pp. 218-227. ISSN 1511-788X (2022)

Legal metrology

Enhancing legal metrology through digitalisation. [Newspaper] (2022)

Malaysian chosen to lead Asia Pacific Legal Metrology grouping. [Newspaper] (2021)

Machining

Optimization of surface roughness in deep hole drilling using moth-flame optimization. ELEKTRIKA- Journal of Electrical Engineering, 18 (3-2). pp. 62-68. ISSN 0128-4428 (2019)

Machining performance

Modeling and optimization of electric discharge machining performances using harmony search algorithm. ELEKTRIKA- Journal of Electrical Engineering, 18 (3-2). pp. 56-61. ISSN 0128-4428 (2019)

Metrologi

Elak pasaran domestik jadi tempat lambakan produk tidak berkualiti. [Newspaper] (2019)

Metrology

Don’t make Malaysia dumping ground for poor quality products, says minister. [Newspaper] (2019)

Minimum quantity lubricants (MQL)

Optimization of surface roughness in deep hole drilling using moth-flame optimization. ELEKTRIKA- Journal of Electrical Engineering, 18 (3-2). pp. 62-68. ISSN 0128-4428 (2019)

Moth flame optimization (MFO) algorithm

Optimization of surface roughness in deep hole drilling using moth-flame optimization. ELEKTRIKA- Journal of Electrical Engineering, 18 (3-2). pp. 62-68. ISSN 0128-4428 (2019)

Multiple linear regression (MLR)

Optimization of surface roughness in deep hole drilling using moth-flame optimization. ELEKTRIKA- Journal of Electrical Engineering, 18 (3-2). pp. 62-68. ISSN 0128-4428 (2019)

National Measurement System Act 2007

Malaysian chosen to lead Asia Pacific Legal Metrology grouping. [Newspaper] (2021)

Poisson reconstruction

Three dimension scanning using infrared coded light. ELEKTRIKA- Journal of Electrical Engineering, 19 (2). pp. 46-52. ISSN 0128-4428 (2020)

Polylactic acid (PLA)

The effect of layer thickness on repeatability of 3D printed PLA parts produced using openware 3D printer. IIUM Engineering Journal, 23 (2). pp. 218-227. ISSN 1511-788X (2022)

Random sample consensus (RANSAC)

Three dimension scanning using infrared coded light. ELEKTRIKA- Journal of Electrical Engineering, 19 (2). pp. 46-52. ISSN 0128-4428 (2020)

Regression

Modeling and optimization of electric discharge machining performances using harmony search algorithm. ELEKTRIKA- Journal of Electrical Engineering, 18 (3-2). pp. 56-61. ISSN 0128-4428 (2019)

Repeatability

The effect of layer thickness on repeatability of 3D printed PLA parts produced using openware 3D printer. IIUM Engineering Journal, 23 (2). pp. 218-227. ISSN 1511-788X (2022)

Road quality monitoring

Pavement condition analysis via vehicle mounted accelerometer data. IIUM Engineering Journal, 21 (1). pp. 73-84. ISSN 1511-788X (2020)

Sistem standard pengukuran

Elak pasaran domestik jadi tempat lambakan produk tidak berkualiti. [Newspaper] (2019)

Standard measurement

Don’t make Malaysia dumping ground for poor quality products, says minister. [Newspaper] (2019)

Surface roughness

Optimization of surface roughness in deep hole drilling using moth-flame optimization. ELEKTRIKA- Journal of Electrical Engineering, 18 (3-2). pp. 62-68. ISSN 0128-4428 (2019)

Modeling and optimization of electric discharge machining performances using harmony search algorithm. ELEKTRIKA- Journal of Electrical Engineering, 18 (3-2). pp. 56-61. ISSN 0128-4428 (2019)

Technical skills

Don’t make Malaysia dumping ground for poor quality products, says minister. [Newspaper] (2019)

Unit pengukuran

Elak pasaran domestik jadi tempat lambakan produk tidak berkualiti. [Newspaper] (2019)

Verifications

Enhancing legal metrology through digitalisation. [Newspaper] (2022)

Vibrations

Pavement condition analysis via vehicle mounted accelerometer data. IIUM Engineering Journal, 21 (1). pp. 73-84. ISSN 1511-788X (2020)

Weighing and measuring instruments

Enhancing legal metrology through digitalisation. [Newspaper] (2022)

This list was generated on Wed Feb 28 18:53:07 2024 +08.