Items where Subject is "Automotive"

Taxonomy (71)
- By Subject (71)
  - College of Engineering (71)
    - Mechanical Engineering (71)
      - Automotive (71)

Group by: Creators | Item Type | Keywords

Number of items at this level: 288.

1-D Reynolds equation

Tribological analysis on the effect of heat transfer towards engine in-cylinder friction. Journal of Transport System Engineering, 6 (1). pp. 17-32. ISSN 2289–9790 (2019)

2-D Reynolds equation

Thermo-elastohydrodynamic analysis of piston connecting-rod big end journal bearing lubrication system. Journal of Transport System Engineering, 7 (2). pp. 1-21. ISSN 2289–9790 (2020)

2-D energy equation

Thermo-elastohydrodynamic analysis of piston connecting-rod big end journal bearing lubrication system. Journal of Transport System Engineering, 7 (2). pp. 1-21. ISSN 2289–9790 (2020)

802.11

Automotive real-time data acquisition using wi-fi connected embedded system. ELEKTRIKA- Journal of Electrical Engineering, 18 (3-2). pp. 7-12. ISSN 0128-4428 (2019)

AEB system

A review of automated emergency braking system and the trending for future vehicles. In: Southeast Asia Safer Mobility Symposium 2013, 21 October 2013, Road Transport Academy (APJ), Melaka, Malaysia. (In Press) (2013)

ASEAN NCAP

Consumers’ perception of vehicle safety features in four ASEAN countries. In: Southeast Asia Safer Mobility Symposium 2013, 21 October 2013, Road Transport Academy (APJ), Melaka, Malaysia. (In Press) (2013)

How does NCAP for ASEAN help the region’s road safety index? In: Southeast Asia Safer Mobility Symposium 2013, 21 October 2013, Road Transport Academy (APJ), Melaka, Malaysia. (In Press) (2013)

ASEAN Road Safety

How does NCAP for ASEAN help the region’s road safety index? In: Southeast Asia Safer Mobility Symposium 2013, 21 October 2013, Road Transport Academy (APJ), Melaka, Malaysia. (In Press) (2013)

ATV

Dynamic simulation model of a hybrid electric ATV. Journal of Transport System Engineering, 8 (2). pp. 1-7. ISSN 2289–9790 (2021)

Accelerated test

Vehicle accelerated corrosion test procedures for automotive in Malaysia. MATEC Web of Conferences 90, 90: 01040. pp. 1-7. ISSN 2261-236X (2016)

Accumulator

Feasibility studies on utilization of low-pressure in hydro-pneumatic driveline. Journal of Engineeringand Technology (JET), 7 (7). pp. 28-42. ISSN 2180-3811 (2016)

Active drag reduction

Review of passive drag reduction techniques for bluff road vehicles. IIUM Engineering Journal, 15 (1). pp. 61-69. ISSN 1511-788X (2014)

Active idle stop

Development of active idle stop system for automotive vehicle during uphill driving. Journal of Engineering and Technology, 7 (1). pp. 77-101. ISSN 2180-3811 (2016)

Adhesive joining

Mechanical and failure analysis of multi-materials adhesive joining. The International Journal of Integrated Engineering, 13 (7). pp. 160-166. ISSN 2229-838X (2021)

Adoption rate

Timely jolt needed for EV industry. [Newspaper] (2022)

Aerodynamic characteristics

Effects of boundary layer scrapper on aerodynamic characteristics for automotive wind tunnel testing. Journal of Transport System Engineering, 2 (2). pp. 14-20. ISSN 2289–9790 (2015)

Air cooling

Simulation battery cooling system for small scale electric vehicle (light EV). Journal of Transport System Engineering, 8 (2). pp. 8-15. ISSN 2289–9790 (2021)

Air pollutants

Portable UV plasma air purifier in automobile. Journal of Transport System Engineering, 2 (2). pp. 42-45. ISSN 2289–9790 (2015)

Air purifier

Portable UV plasma air purifier in automobile. Journal of Transport System Engineering, 2 (2). pp. 42-45. ISSN 2289–9790 (2015)

Assembly facilities

Sarawak wants to assemble EVs, Hydrogen Cars – bets big on renewable energy. [Website]

Automatic braking

Sliding mode controller of automatic braking system. Journal of Engineering and Technology, 6 (2). pp. 88-108. ISSN 2180-3811 (2015)

Automatif

Alumni UTeM ketua jurutera bangunkan kereta perisai bertaraf dunia. [Website]

Automobile

Portable UV plasma air purifier in automobile. Journal of Transport System Engineering, 2 (2). pp. 42-45. ISSN 2289–9790 (2015)

Automobile driver education

Mohd Jawi, Zulhaidi and Solah, Mohd Syazwan and Ariffin, Aqbal Hafeez and Shabadin, Akmalia and Ali, Azhani and Osman, Mohd Rasid and Wong, Shaw Voon Automotive consumerism: a study of car user’s practices & behaviour in Klang Valley, Malaysia. Malaysian Institute of Road Safety Research (MIROS), Kajang, Selangor. ISBN 978-967-2078-11-1 (2017)

Automotif

Tarik minat dunia automotif. [Newspaper] (2022)

Automotive

Scaling EV for future mobility in SEA. [Newspaper] (2022)

Serving the future of electric vehicles in Malaysia. [Newspaper] (2021)

Volvo Car Malaysia plans to produce first locally-assembled EV in Shah Alam. [Newspaper] (2022)

Mechanical and failure analysis of multi-materials adhesive joining. The International Journal of Integrated Engineering, 13 (7). pp. 160-166. ISSN 2229-838X (2021)

Saving energy and environment with electric cars. [Newspaper] (2019)

Huawei to help Malaysia's Apollo to develop new EVs. [Newspaper] (2022)

Time to invest in electronics and EV market. [Newspaper] (2021)

We need to join the race before it's too late. [Newspaper] (2021)

Vehicle accelerated corrosion test procedures for automotive in Malaysia. MATEC Web of Conferences 90, 90: 01040. pp. 1-7. ISSN 2261-236X (2016)

Toyota officially launches Veloz, already has 6,000 bookings. [Newspaper] (In Press) (2022)

Clamping force adjustment system for a continuously variable transmission. Journal of Transport System Engineering, 5 (1). pp. 13-16. ISSN 2289–9790 (2018)

Opportunities and constraints of virtual reality application in international and domestic car companies of Malaysia. In: UKSim 14th International Conference on Modelling and Simulation. IEEE Xplore, Cambridge, United Kingdom, pp. 273-277. ISBN 978-0-7695-4682-7 (2012)

Timely jolt needed for EV industry. [Newspaper] (2022)

Automotive Hi-Tech Valley (AHTV)

PM lancar Automative Hi-Tech Valley. [Newspaper] (2022)

Automotive applications

Evaluation of DC motors for clamping force mechanism in an electro-mechanical continuously variable transmission. Journal of Transport System Engineering, 6 (1). pp. 40-44. ISSN 2289–9790 (2019)

Automotive consumerism

Automotive consumerism in Malaysia with regard to car maintenance. Journal of the Society of Automotive Engineers Malaysia, 1 (2). pp. 137-153. ISSN 2550-2239 (2017)

Automotive designers

Producing designers capable of manoeuvring marts. [Newspaper] (2014)

Automotive industry

Malaysia auto industry: tapping on new areas of opportunities. [Website]

Huge potential in electric vehicles. [Newspaper] (In Press) (2022)

Development of Computer Aided Engineering (CAE) applications: past, present and future. Jurutera Online: Additional Reports. (2020)

Automotive manufacturers

Malaysia auto industry: tapping on new areas of opportunities. [Website]

Vehicle accelerated corrosion test procedures for automotive in Malaysia. MATEC Web of Conferences 90, 90: 01040. pp. 1-7. ISSN 2261-236X (2016)

Automotive parts

Kenaf composites for automotive components. [Newspaper] (2014)

Automotive sector

New national car project will give automotive sector a jump-start: Dr M. [Newspaper] (2018)

Automotive wind tunnel testing

Effects of boundary layer scrapper on aerodynamic characteristics for automotive wind tunnel testing. Journal of Transport System Engineering, 2 (2). pp. 14-20. ISSN 2289–9790 (2015)

B-segment multipurpose vehicle (MPV)

Toyota officially launches Veloz, already has 6,000 bookings. [Newspaper] (In Press) (2022)

Battery

Dynamic simulation model of a hybrid electric ATV. Journal of Transport System Engineering, 8 (2). pp. 1-7. ISSN 2289–9790 (2021)

Battery Thermal Management System (BTMS)

Simulation battery cooling system for small scale electric vehicle (light EV). Journal of Transport System Engineering, 8 (2). pp. 8-15. ISSN 2289–9790 (2021)

Battery electric vehicles

Sarawak wants to assemble EVs, Hydrogen Cars – bets big on renewable energy. [Website]

Bertaraf global

Alumni UTeM ketua jurutera bangunkan kereta perisai bertaraf dunia. [Website]

Bluff body

Review of passive drag reduction techniques for bluff road vehicles. IIUM Engineering Journal, 15 (1). pp. 61-69. ISSN 1511-788X (2014)

Boundary layer scrapper

Effects of boundary layer scrapper on aerodynamic characteristics for automotive wind tunnel testing. Journal of Transport System Engineering, 2 (2). pp. 14-20. ISSN 2289–9790 (2015)

Brake pads

Reduction of disc brake squeal noise through brake pad modification. Journal of Transport System Engineering, 7 (1). pp. 1-5. ISSN 2289–9790 (2020)

Brake squeal

Reduction of disc brake squeal noise through brake pad modification. Journal of Transport System Engineering, 7 (1). pp. 1-5. ISSN 2289–9790 (2020)

Car maintenance

Automotive consumerism in Malaysia with regard to car maintenance. Journal of the Society of Automotive Engineers Malaysia, 1 (2). pp. 137-153. ISSN 2550-2239 (2017)

Car user’s

Carbon footprint

Rising interest in electric vehicles in Malaysia. [Newspaper] (2022)

Cargo transportation

Malaysia's first locally-produced locomotive by SMH Rail ready for export. [Newspaper] (2021)

Charging stations

Huawei to help Malaysia's Apollo to develop new EVs. [Newspaper] (2022)

Charging system

Guide on electric vehicle charging system. Manual. Suruhanjaya Tenaga, Putrajaya, Malaysia.

Clamping force

Evaluation of DC motors for clamping force mechanism in an electro-mechanical continuously variable transmission. Journal of Transport System Engineering, 6 (1). pp. 40-44. ISSN 2289–9790 (2019)

Coefficient of friction

Influence of hardener / resin ratio towards frictional properties of fibre-reinforced epoxy composite laminates. Journal of Transport System Engineering, 7 (1). pp. 6-12. ISSN 2289–9790 (2020)

Collaboration

Huawei to help Malaysia's Apollo to develop new EVs. [Newspaper] (2022)

Collision warning (CW) system

Complete knocked down (CKD)

Volvo Car Malaysia plans to produce first locally-assembled EV in Shah Alam. [Newspaper] (2022)

Computational fluid dynamics

Optimization of backpressure in exhaust muffler for automobile. Journal of Advanced Mechanical Engineering Applications (JAMEA), 2 (2). pp. 23-30. ISSN 2716-6201 (2021)

Contact pressure

Thermo-elastohydrodynamic analysis of piston connecting-rod big end journal bearing lubrication system. Journal of Transport System Engineering, 7 (2). pp. 1-21. ISSN 2289–9790 (2020)

Continuous variable transmission

Evaluation of DC motors for clamping force mechanism in an electro-mechanical continuously variable transmission. Journal of Transport System Engineering, 6 (1). pp. 40-44. ISSN 2289–9790 (2019)

Control Valve

Design of self-regulated flow control mechanism for a turbocharger gas stand test facility. Jurnal Mekanikal, 45. pp. 63-80. ISSN 2289-3873 (2022)

Corrosion performance

Vehicle accelerated corrosion test procedures for automotive in Malaysia. MATEC Web of Conferences 90, 90: 01040. pp. 1-7. ISSN 2261-236X (2016)

Country's policy

Timely jolt needed for EV industry. [Newspaper] (2022)

Crash test

Analysis of Malaysian pregnant driver with restraint system during automotive collision of a multi-purpose vehicle. In: Southeast Asia Safer Mobility Symposium 2013, 21 October 2013, Road Transport Academy (APJ), Melaka, Malaysia. (In Press) (2013)

Cylindrical battery

China's EVE Energy to build US$422.3mil battery plant in Malaysia. [Newspaper] (2022)

Cylindrical battery cell

Rechargeable battery system for small scale electric vehicle. Journal of Transport System Engineering, 8 (2). pp. 16-20. ISSN 2289–9790 (2021)

DC motor

Evaluation of DC motors for clamping force mechanism in an electro-mechanical continuously variable transmission. Journal of Transport System Engineering, 6 (1). pp. 40-44. ISSN 2289–9790 (2019)

Clamping force adjustment system for a continuously variable transmission. Journal of Transport System Engineering, 5 (1). pp. 13-16. ISSN 2289–9790 (2018)

Data mining

An analysis of energy mix in Peninsular Malaysia in line with the Malaysia's existing energy policy. Journal of Engineeringand Technology (JET), 7 (1). pp. 49-64. ISSN 2180-3811 (2016)

Deceleration

Development of active idle stop system for automotive vehicle during uphill driving. Journal of Engineering and Technology, 7 (1). pp. 77-101. ISSN 2180-3811 (2016)

Deformation

Predicting frictional losses generated by piston connecting-rod big end journal bearing for an internal combustion engine. Journal of Transport System Engineering, 6 (1). pp. 54-67. ISSN 2289–9790 (2019)

Desired torque

Sliding mode controller of automatic braking system. Journal of Engineering and Technology, 6 (2). pp. 88-108. ISSN 2180-3811 (2015)

Drag reduction

Review of passive drag reduction techniques for bluff road vehicles. IIUM Engineering Journal, 15 (1). pp. 61-69. ISSN 1511-788X (2014)

Driver assistance system

Review of on-road approaching motorcycle detection and tracking techniques. In: Southeast Asia Safer Mobility Symposium 2013, 21 October 2013, Road Transport Academy (APJ), Melaka, Malaysia. (In Press) (2013)

Driving simulator

Development of driving simulator for In-Vehicle Information System (IVIS) evaluation: progress & challenges. In: Southeast Asia Safer Mobility Symposium 2013, 21 October 2013, Road Transport Academy (APJ), Melaka, Malaysia. (In Press) (2013)

Durability

Vehicle accelerated corrosion test procedures for automotive in Malaysia. MATEC Web of Conferences 90, 90: 01040. pp. 1-7. ISSN 2261-236X (2016)

Duty exemption

Rising interest in electric vehicles in Malaysia. [Newspaper] (2022)

Dynamic wireless charging

Performance analysis on dynamic wireless charging for electric vehicle using ferrite core. IIUM Engineering Journal, 23 (1). pp. 46-59. ISSN 1511-788X (2022)

Dynamometer tests

Reduction of disc brake squeal noise through brake pad modification. Journal of Transport System Engineering, 7 (1). pp. 1-5. ISSN 2289–9790 (2020)

E-mails

Can internet usage ease the process of learning engineering subjects?: a study on students of diploma in mechanical engineering. In: STSS 2004 : Prosiding Seminar Kebangsaan Sains Teknologi & Sains Sosial / Jilid 2 : Sains Sosial, 31 Mei – 1 Jun 2004, Hotel Vistana, Kuantan, Pahang. (In Press) (2004)

EMR method

Dynamic simulation model of a hybrid electric ATV. Journal of Transport System Engineering, 8 (2). pp. 1-7. ISSN 2289–9790 (2021)

ESP8266

Automotive real-time data acquisition using wi-fi connected embedded system. ELEKTRIKA- Journal of Electrical Engineering, 18 (3-2). pp. 7-12. ISSN 0128-4428 (2019)

EV batteries

We need to join the race before it's too late. [Newspaper] (2021)

EV battery

China's EVE Energy to build US$422.3mil battery plant in Malaysia. [Newspaper] (2022)

EV development

Serving the future of electric vehicles in Malaysia. [Newspaper] (2021)

EV manufacturers

Time to invest in electronics and EV market. [Newspaper] (2021)

EV manufacturing

We need to join the race before it's too late. [Newspaper] (2021)

EV technology

Govt to enhance EV technology through NESTI. [Newspaper] (2021)

Educational and training programme

Producing designers capable of manoeuvring marts. [Newspaper] (2014)

Electric battery

Saving energy and environment with electric cars. [Newspaper] (2019)

Electric cars

Saving energy and environment with electric cars. [Newspaper] (2019)

Electric vehicle

Guide on electric vehicle charging system. Manual. Suruhanjaya Tenaga, Putrajaya, Malaysia.

Socar, TNB collaborate on EV adoption data. [Newspaper] (2021)

Electric vehicle (EV)

Govt to enhance EV technology through NESTI. [Newspaper] (2021)

Rising interest in electric vehicles in Malaysia. [Newspaper] (2022)

Scaling EV for future mobility in SEA. [Newspaper] (2022)

Timely jolt needed for EV industry. [Newspaper] (2022)

Performance analysis on dynamic wireless charging for electric vehicle using ferrite core. IIUM Engineering Journal, 23 (1). pp. 46-59. ISSN 1511-788X (2022)

Electric vehicle charging system

Guide on electric vehicle charging system. Manual. Suruhanjaya Tenaga, Putrajaya, Malaysia.

Electric vehicles

Serving the future of electric vehicles in Malaysia. [Newspaper] (2021)

Volvo Car Malaysia plans to produce first locally-assembled EV in Shah Alam. [Newspaper] (2022)

Saving energy and environment with electric cars. [Newspaper] (2019)

China's EVE Energy to build US$422.3mil battery plant in Malaysia. [Newspaper] (2022)

Huawei to help Malaysia's Apollo to develop new EVs. [Newspaper] (2022)

Time to invest in electronics and EV market. [Newspaper] (2021)

We need to join the race before it's too late. [Newspaper] (2021)

Simulation battery cooling system for small scale electric vehicle (light EV). Journal of Transport System Engineering, 8 (2). pp. 8-15. ISSN 2289–9790 (2021)

Electro-mechanical

Evaluation of DC motors for clamping force mechanism in an electro-mechanical continuously variable transmission. Journal of Transport System Engineering, 6 (1). pp. 40-44. ISSN 2289–9790 (2019)

Clamping force adjustment system for a continuously variable transmission. Journal of Transport System Engineering, 5 (1). pp. 13-16. ISSN 2289–9790 (2018)

Energy Efficient Vehicles (EEV)

Malaysia auto industry: tapping on new areas of opportunities. [Website]

Energy efficient vehicle

Performance of energy regenerative suspension system through laboratory testing. Journal of Engineeringand Technology (JET), 7 (2). pp. 17-27. ISSN 2180-3811 (2016)

Energy harvesting

Performance of energy regenerative suspension system through laboratory testing. Journal of Engineeringand Technology (JET), 7 (2). pp. 17-27. ISSN 2180-3811 (2016)

Energy management

Parallel hybrid electric vehicle simulation model using energetic macroscopic representation method. Journal of Transport System Engineering, 5 (1). pp. 7-12. ISSN 2289–9790 (2018)

Energy-mix

An analysis of energy mix in Peninsular Malaysia in line with the Malaysia's existing energy policy. Journal of Engineeringand Technology (JET), 7 (1). pp. 49-64. ISSN 2180-3811 (2016)

Engine in-cylinder friction

Tribological analysis on the effect of heat transfer towards engine in-cylinder friction. Journal of Transport System Engineering, 6 (1). pp. 17-32. ISSN 2289–9790 (2019)

Engine oil

Tribological study of engine oil lubricant characteristics and its performance on 660cc engine. Journal of Transport System Engineering, 2 (1). pp. 37-40. ISSN 2289-9790 (2015)

Engineering capability

New national car project will give automotive sector a jump-start: Dr M. [Newspaper] (2018)

Engineering subjects

Exhaust

Optimization of backpressure in exhaust muffler for automobile. Journal of Advanced Mechanical Engineering Applications (JAMEA), 2 (2). pp. 23-30. ISSN 2716-6201 (2021)

Experiment

Reduction of disc brake squeal noise through brake pad modification. Journal of Transport System Engineering, 7 (1). pp. 1-5. ISSN 2289–9790 (2020)

Experimental Testing

Design of a drop impact test rig for accelerometer validation for turbocharger application. Jurnal Mekanikal, 45. pp. 53-62. ISSN 2289-3873 (2022)

Expertise

Huawei to help Malaysia's Apollo to develop new EVs. [Newspaper] (2022)

External flow

Conceptual design of remotely operated underwater vehicle. Journal of Transport System Engineering, 1 (2). pp. 15-19. ISSN 2289-9790 (2015)

Failure analysis

Mechanical and failure analysis of multi-materials adhesive joining. The International Journal of Integrated Engineering, 13 (7). pp. 160-166. ISSN 2229-838X (2021)

Ferrite core

Performance analysis on dynamic wireless charging for electric vehicle using ferrite core. IIUM Engineering Journal, 23 (1). pp. 46-59. ISSN 1511-788X (2022)

Fibre-reinforced composite

Influence of hardener / resin ratio towards frictional properties of fibre-reinforced epoxy composite laminates. Journal of Transport System Engineering, 7 (1). pp. 6-12. ISSN 2289–9790 (2020)

Film profile

Thermo-elastohydrodynamic analysis of piston connecting-rod big end journal bearing lubrication system. Journal of Transport System Engineering, 7 (2). pp. 1-21. ISSN 2289–9790 (2020)

Finite element analysis

Portable and compact tire-clamping mechanism for medium sized tire. Journal of Transport System Engineering, 8 (1). pp. 36-40. ISSN 2289–9790 (2021)

Finite element method

Optimization of backpressure in exhaust muffler for automobile. Journal of Advanced Mechanical Engineering Applications (JAMEA), 2 (2). pp. 23-30. ISSN 2716-6201 (2021)

Flow Control Mechanism

Design of self-regulated flow control mechanism for a turbocharger gas stand test facility. Jurnal Mekanikal, 45. pp. 63-80. ISSN 2289-3873 (2022)

Fourball tester

Tribological study of engine oil lubricant characteristics and its performance on 660cc engine. Journal of Transport System Engineering, 2 (1). pp. 37-40. ISSN 2289-9790 (2015)

Fuel consumption

Parallel hybrid electric vehicle simulation model using energetic macroscopic representation method. Journal of Transport System Engineering, 5 (1). pp. 7-12. ISSN 2289–9790 (2018)

Tribological study of engine oil lubricant characteristics and its performance on 660cc engine. Journal of Transport System Engineering, 2 (1). pp. 37-40. ISSN 2289-9790 (2015)

Genetic algorithm

Development of active idle stop system for automotive vehicle during uphill driving. Journal of Engineering and Technology, 7 (1). pp. 77-101. ISSN 2180-3811 (2016)

Hab permotoran

PM lancar lembah automotif berteknologi tinggi tanjung malim. [Newspaper] (2022)

Hardener/ resin ratio

Influence of hardener / resin ratio towards frictional properties of fibre-reinforced epoxy composite laminates. Journal of Transport System Engineering, 7 (1). pp. 6-12. ISSN 2289–9790 (2020)

Heat transfer

Tribological analysis on the effect of heat transfer towards engine in-cylinder friction. Journal of Transport System Engineering, 6 (1). pp. 17-32. ISSN 2289–9790 (2019)

High speed machine

Design of a drop impact test rig for accelerometer validation for turbocharger application. Jurnal Mekanikal, 45. pp. 53-62. ISSN 2289-3873 (2022)

High-fidelity model

Feasibility study of surrogate model for the application of vehicle suspension system. Journal of Transport System Engineering, 8 (1). pp. 15-28. ISSN 2289–9790 (2021)

Hybrid electric

Dynamic simulation model of a hybrid electric ATV. Journal of Transport System Engineering, 8 (2). pp. 1-7. ISSN 2289–9790 (2021)

Hydraulic hybrid vehicle

Feasibility studies on utilization of low-pressure in hydro-pneumatic driveline. Journal of Engineeringand Technology (JET), 7 (7). pp. 28-42. ISSN 2180-3811 (2016)

Hydro-pneumatic storage

Feasibility studies on utilization of low-pressure in hydro-pneumatic driveline. Journal of Engineeringand Technology (JET), 7 (7). pp. 28-42. ISSN 2180-3811 (2016)

Hydrogen fuel cell vehicles

Sarawak wants to assemble EVs, Hydrogen Cars – bets big on renewable energy. [Website]

In-vehicle information system

Incentives

Timely jolt needed for EV industry. [Newspaper] (2022)

Inductive wireless charging

Performance analysis on dynamic wireless charging for electric vehicle using ferrite core. IIUM Engineering Journal, 23 (1). pp. 46-59. ISSN 1511-788X (2022)

Industri automotif

PM lancar Automative Hi-Tech Valley. [Newspaper] (2022)

PM lancar lembah automotif berteknologi tinggi tanjung malim. [Newspaper] (2022)

Industrial crop

Kenaf composites for automotive components. [Newspaper] (2014)

Inovasi

Inovasi kereta solar & hidrogen pelajar uitm. [Video] (2020)

Intelligent vehicles

Internet of Things (IoT)

Automotive real-time data acquisition using wi-fi connected embedded system. ELEKTRIKA- Journal of Electrical Engineering, 18 (3-2). pp. 7-12. ISSN 0128-4428 (2019)

Internet teaching

Journal bearing

Kejuruteraan automotif

Belajar kejuruteraan automotif menerusi kereta nasional ketiga. [Newspaper] (2019)

Kenaf composite

Kenaf composites for automotive components. [Newspaper] (2014)

Kenderaan elektrik (EV)

MOSTI fokus kenderaan elektrik. [Newspaper] (2022)

PM lancar lembah automotif berteknologi tinggi tanjung malim. [Newspaper] (2022)

Kepakaran tempatan

Alumni UTeM ketua jurutera bangunkan kereta perisai bertaraf dunia. [Website]

Kereta Solar

Inovasi kereta solar & hidrogen pelajar uitm. [Video] (2020)

Kereta nasional

Belajar kejuruteraan automotif menerusi kereta nasional ketiga. [Newspaper] (2019)

Kereta perisai

Alumni UTeM ketua jurutera bangunkan kereta perisai bertaraf dunia. [Website]

Lembah Automotif Berteknologi Tinggi

PM lancar lembah automotif berteknologi tinggi tanjung malim. [Newspaper] (2022)

Liquid cooling

Simulation battery cooling system for small scale electric vehicle (light EV). Journal of Transport System Engineering, 8 (2). pp. 8-15. ISSN 2289–9790 (2021)

Lithium-ion battery

New battery model integrating the internal resistance as a function of temperature. Journal of Transport System Engineering, 5 (1). pp. 37-41. ISSN 2289–9790 (2018)

Rechargeable battery system for small scale electric vehicle. Journal of Transport System Engineering, 8 (2). pp. 16-20. ISSN 2289–9790 (2021)

Locomotive

Malaysia's first locally-produced locomotive by SMH Rail ready for export. [Newspaper] (2021)

Low-fidelity model

Feasibility study of surrogate model for the application of vehicle suspension system. Journal of Transport System Engineering, 8 (1). pp. 15-28. ISSN 2289–9790 (2021)

MATLAB/Simulink

Simulation battery cooling system for small scale electric vehicle (light EV). Journal of Transport System Engineering, 8 (2). pp. 8-15. ISSN 2289–9790 (2021)

Malaysia’s energy policies

An analysis of energy mix in Peninsular Malaysia in line with the Malaysia's existing energy policy. Journal of Engineeringand Technology (JET), 7 (1). pp. 49-64. ISSN 2180-3811 (2016)

Manufacturers

Huge potential in electric vehicles. [Newspaper] (In Press) (2022)

Manufacturing

Kenaf composites for automotive components. [Newspaper] (2014)

Malaysia auto industry: tapping on new areas of opportunities. [Website]

Manufacturing facility

Volvo Car Malaysia plans to produce first locally-assembled EV in Shah Alam. [Newspaper] (2022)

China's EVE Energy to build US$422.3mil battery plant in Malaysia. [Newspaper] (2022)

Manufacturing technology

Huge potential in electric vehicles. [Newspaper] (In Press) (2022)

Material properties

Mechanical and failure analysis of multi-materials adhesive joining. The International Journal of Integrated Engineering, 13 (7). pp. 160-166. ISSN 2229-838X (2021)

Medium-sized tire

Portable and compact tire-clamping mechanism for medium sized tire. Journal of Transport System Engineering, 8 (1). pp. 36-40. ISSN 2289–9790 (2021)

Message Queue Telemetry Transport (MQTT)

Automotive real-time data acquisition using wi-fi connected embedded system. ELEKTRIKA- Journal of Electrical Engineering, 18 (3-2). pp. 7-12. ISSN 0128-4428 (2019)

Metal pushing V-belt

Clamping force adjustment system for a continuously variable transmission. Journal of Transport System Engineering, 5 (1). pp. 13-16. ISSN 2289–9790 (2018)

Middle box muffler

Optimization of backpressure in exhaust muffler for automobile. Journal of Advanced Mechanical Engineering Applications (JAMEA), 2 (2). pp. 23-30. ISSN 2716-6201 (2021)

Mobility

Socar, TNB collaborate on EV adoption data. [Newspaper] (2021)

Modelling

Parallel hybrid electric vehicle simulation model using energetic macroscopic representation method. Journal of Transport System Engineering, 5 (1). pp. 7-12. ISSN 2289–9790 (2018)

Modulus of elasticity

Influence of hardener / resin ratio towards frictional properties of fibre-reinforced epoxy composite laminates. Journal of Transport System Engineering, 7 (1). pp. 6-12. ISSN 2289–9790 (2020)

Motor vehicle

Huge potential in electric vehicles. [Newspaper] (In Press) (2022)

Motorcycle detection

Multi-material

Mechanical and failure analysis of multi-materials adhesive joining. The International Journal of Integrated Engineering, 13 (7). pp. 160-166. ISSN 2229-838X (2021)

NEDC consumption

Parallel hybrid electric vehicle simulation model using energetic macroscopic representation method. Journal of Transport System Engineering, 5 (1). pp. 7-12. ISSN 2289–9790 (2018)

NESTI

Govt to enhance EV technology through NESTI. [Newspaper] (2021)

National Automotive Policy 2020

Malaysia auto industry: tapping on new areas of opportunities. [Website]

National car project

New national car project will give automotive sector a jump-start: Dr M. [Newspaper] (2018)

Negara neutral karbon

PM lancar lembah automotif berteknologi tinggi tanjung malim. [Newspaper] (2022)

Node-RED

Automotive real-time data acquisition using wi-fi connected embedded system. ELEKTRIKA- Journal of Electrical Engineering, 18 (3-2). pp. 7-12. ISSN 0128-4428 (2019)

Nonlinear vehicle longitudinal model

Development of active idle stop system for automotive vehicle during uphill driving. Journal of Engineering and Technology, 7 (1). pp. 77-101. ISSN 2180-3811 (2016)

Numerical analysis

On-road

Operational efficiency

Malaysia's first locally-produced locomotive by SMH Rail ready for export. [Newspaper] (2021)

Ownership

Rising interest in electric vehicles in Malaysia. [Newspaper] (2022)

PID controller

Sliding mode controller of automatic braking system. Journal of Engineering and Technology, 6 (2). pp. 88-108. ISSN 2180-3811 (2015)

Particle swarm optimization

Sliding mode controller of automatic braking system. Journal of Engineering and Technology, 6 (2). pp. 88-108. ISSN 2180-3811 (2015)

Passive drag reduction

Review of passive drag reduction techniques for bluff road vehicles. IIUM Engineering Journal, 15 (1). pp. 61-69. ISSN 1511-788X (2014)

Perforated pipe

Optimization of backpressure in exhaust muffler for automobile. Journal of Advanced Mechanical Engineering Applications (JAMEA), 2 (2). pp. 23-30. ISSN 2716-6201 (2021)

Piston ring

Tribological analysis on the effect of heat transfer towards engine in-cylinder friction. Journal of Transport System Engineering, 6 (1). pp. 17-32. ISSN 2289–9790 (2019)

Practices and behaviour

Pregnant driver

Product quality

Development of Computer Aided Engineering (CAE) applications: past, present and future. Jurutera Online: Additional Reports. (2020)

Production plants

Sarawak wants to assemble EVs, Hydrogen Cars – bets big on renewable energy. [Website]

Proportional-Integral-Derivative controller

Development of active idle stop system for automotive vehicle during uphill driving. Journal of Engineering and Technology, 7 (1). pp. 77-101. ISSN 2180-3811 (2016)

Prototype built

Development of Computer Aided Engineering (CAE) applications: past, present and future. Jurutera Online: Additional Reports. (2020)

ROV: underwater

Conceptual design of remotely operated underwater vehicle. Journal of Transport System Engineering, 1 (2). pp. 15-19. ISSN 2289-9790 (2015)

Rail industry

Malaysia's first locally-produced locomotive by SMH Rail ready for export. [Newspaper] (2021)

Rapid prototyping

The development of computational model through reverse engineering: side mirror case study. Journal of Mechanical Engineering and Technology, 1 (1). pp. 25-41. ISSN 2180-1053 (2009)

Real-time

Regenerative suspension

Performance of energy regenerative suspension system through laboratory testing. Journal of Engineeringand Technology (JET), 7 (2). pp. 17-27. ISSN 2180-3811 (2016)

Reka bentuk mekanikal

Tarik minat dunia automotif. [Newspaper] (2022)

Renewable energy

Sarawak wants to assemble EVs, Hydrogen Cars – bets big on renewable energy. [Website]

An analysis of energy mix in Peninsular Malaysia in line with the Malaysia's existing energy policy. Journal of Engineeringand Technology (JET), 7 (1). pp. 49-64. ISSN 2180-3811 (2016)

Restraint system

Reverse engineering

The development of computational model through reverse engineering: side mirror case study. Journal of Mechanical Engineering and Technology, 1 (1). pp. 25-41. ISSN 2180-1053 (2009)

Rigid

Road gradient

Development of active idle stop system for automotive vehicle during uphill driving. Journal of Engineering and Technology, 7 (1). pp. 77-101. ISSN 2180-3811 (2016)

Road safety

Rotordynamics

Design of a drop impact test rig for accelerometer validation for turbocharger application. Jurnal Mekanikal, 45. pp. 53-62. ISSN 2289-3873 (2022)

Sains dan teknologi

Inovasi kereta solar & hidrogen pelajar uitm. [Video] (2020)

Scanning software

The development of computational model through reverse engineering: side mirror case study. Journal of Mechanical Engineering and Technology, 1 (1). pp. 25-41. ISSN 2180-1053 (2009)

Screw-thread

Clamping force adjustment system for a continuously variable transmission. Journal of Transport System Engineering, 5 (1). pp. 13-16. ISSN 2289–9790 (2018)

Seat belts

Self-organizing map

An analysis of energy mix in Peninsular Malaysia in line with the Malaysia's existing energy policy. Journal of Engineeringand Technology (JET), 7 (1). pp. 49-64. ISSN 2180-3811 (2016)

Self-regulated

Design of self-regulated flow control mechanism for a turbocharger gas stand test facility. Jurnal Mekanikal, 45. pp. 63-80. ISSN 2289-3873 (2022)

Simulation

New battery model integrating the internal resistance as a function of temperature. Journal of Transport System Engineering, 5 (1). pp. 37-41. ISSN 2289–9790 (2018)

Development of Computer Aided Engineering (CAE) applications: past, present and future. Jurutera Online: Additional Reports. (2020)

Sistem penyimpanan tenaga

MOSTI fokus kenderaan elektrik. [Newspaper] (2022)

Skilled Malaysians

New national car project will give automotive sector a jump-start: Dr M. [Newspaper] (2018)

Sliding mode controller

Sliding mode controller of automatic braking system. Journal of Engineering and Technology, 6 (2). pp. 88-108. ISSN 2180-3811 (2015)

Solar-storage-EV solutions

Huawei to help Malaysia's Apollo to develop new EVs. [Newspaper] (2022)

Solidworks simulation

Portable and compact tire-clamping mechanism for medium sized tire. Journal of Transport System Engineering, 8 (1). pp. 36-40. ISSN 2289–9790 (2021)

Speed reduction

State-of-Charge

Dynamic simulation model of a hybrid electric ATV. Journal of Transport System Engineering, 8 (2). pp. 1-7. ISSN 2289–9790 (2021)

Stopping distance

Strength of materials

Vehicle accelerated corrosion test procedures for automotive in Malaysia. MATEC Web of Conferences 90, 90: 01040. pp. 1-7. ISSN 2261-236X (2016)

Structural modification

Reduction of disc brake squeal noise through brake pad modification. Journal of Transport System Engineering, 7 (1). pp. 1-5. ISSN 2289–9790 (2020)

Surrogate model

Feasibility study of surrogate model for the application of vehicle suspension system. Journal of Transport System Engineering, 8 (1). pp. 15-28. ISSN 2289–9790 (2021)

Teknologi EV

MOSTI fokus kenderaan elektrik. [Newspaper] (2022)

Teknologi go-kart

Tarik minat dunia automotif. [Newspaper] (2022)

Temperature effect

New battery model integrating the internal resistance as a function of temperature. Journal of Transport System Engineering, 5 (1). pp. 37-41. ISSN 2289–9790 (2018)

Test environment

Vehicle accelerated corrosion test procedures for automotive in Malaysia. MATEC Web of Conferences 90, 90: 01040. pp. 1-7. ISSN 2261-236X (2016)

Thermo-elastohydrodynamic

Thermo-elastohydrodynamic analysis of piston connecting-rod big end journal bearing lubrication system. Journal of Transport System Engineering, 7 (2). pp. 1-21. ISSN 2289–9790 (2020)

Thermocouple

Rechargeable battery system for small scale electric vehicle. Journal of Transport System Engineering, 8 (2). pp. 16-20. ISSN 2289–9790 (2021)

Time to collision

Tire-wheel clamp

Portable and compact tire-clamping mechanism for medium sized tire. Journal of Transport System Engineering, 8 (1). pp. 36-40. ISSN 2289–9790 (2021)

Tobacco substitute

Kenaf composites for automotive components. [Newspaper] (2014)

Tracking

Traffic safety

Tribological

Tribology

Tribological study of engine oil lubricant characteristics and its performance on 660cc engine. Journal of Transport System Engineering, 2 (1). pp. 37-40. ISSN 2289-9790 (2015)

Tribological analysis on the effect of heat transfer towards engine in-cylinder friction. Journal of Transport System Engineering, 6 (1). pp. 17-32. ISSN 2289–9790 (2019)

Tribometer

Influence of hardener / resin ratio towards frictional properties of fibre-reinforced epoxy composite laminates. Journal of Transport System Engineering, 7 (1). pp. 6-12. ISSN 2289–9790 (2020)

Turbocharger

Design of a drop impact test rig for accelerometer validation for turbocharger application. Jurnal Mekanikal, 45. pp. 53-62. ISSN 2289-3873 (2022)

Turbocharger gas stand

Design of self-regulated flow control mechanism for a turbocharger gas stand test facility. Jurnal Mekanikal, 45. pp. 63-80. ISSN 2289-3873 (2022)

UN Decade of Action 2011-2020

How does NCAP for ASEAN help the region’s road safety index? In: Southeast Asia Safer Mobility Symposium 2013, 21 October 2013, Road Transport Academy (APJ), Melaka, Malaysia. (In Press) (2013)

UV plasma

Portable UV plasma air purifier in automobile. Journal of Transport System Engineering, 2 (2). pp. 42-45. ISSN 2289–9790 (2015)

Underwater robotics

Conceptual design of remotely operated underwater vehicle. Journal of Transport System Engineering, 1 (2). pp. 15-19. ISSN 2289-9790 (2015)

Vehicle safety and accessories

Toyota officially launches Veloz, already has 6,000 bookings. [Newspaper] (In Press) (2022)

Vehicle safety features

Vehicle system

Toyota officially launches Veloz, already has 6,000 bookings. [Newspaper] (In Press) (2022)

Vibration

Performance of energy regenerative suspension system through laboratory testing. Journal of Engineeringand Technology (JET), 7 (2). pp. 17-27. ISSN 2180-3811 (2016)

Vibration analysis

Design of a drop impact test rig for accelerometer validation for turbocharger application. Jurnal Mekanikal, 45. pp. 53-62. ISSN 2289-3873 (2022)

Virtual reality

Voltage sensor

Rechargeable battery system for small scale electric vehicle. Journal of Transport System Engineering, 8 (2). pp. 16-20. ISSN 2289–9790 (2021)

Vortex generator

Effects of boundary layer scrapper on aerodynamic characteristics for automotive wind tunnel testing. Journal of Transport System Engineering, 2 (2). pp. 14-20. ISSN 2289–9790 (2015)

Web-surfing

Willingness to pay (WTP)

Zero-emission vehicle

Scaling EV for future mobility in SEA. [Newspaper] (2022)

vehicle crash test

Development of Computer Aided Engineering (CAE) applications: past, present and future. Jurutera Online: Additional Reports. (2020)

This list was generated on Fri Apr 19 18:29:43 2024 +08.

Export as	Atom RSS 1.0 RSS 2.0