Browse by LCH Collections

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Item Type | Keywords
Number of items at this level: 1034.

Article

12MP to promote catalytic growth for the Malaysian aerospace industry. MITI’s Recollective Global Edition (4). p. 11. (2021)

The 8th national energy forum towards a carbon-neutral Malaysia. Energy Malaysia, 18. pp. 24-28. ISSN 2289-7488 (2019)

Advocating reliable & quality supply in the gas industry. Energy Malaysia, 14. pp. 32-34. ISSN 2289-7488 (2018)

Biomass in energy mix penetration. Sustainable Energy Malaysia, 5 (12). pp. 39-41. ISSN 2590-4000 (2022)

Boosting the RE sector with solar. Sustainable Energy Malaysia, 5 (13). pp. 16-19. ISSN 2590-4000 (2021)

Call to invest in the sun. Sustainable Energy Malaysia, 4 (8). pp. 24-27. ISSN 2590-4000 (2020)

Chasing the sun. Energy Malaysia, 14. pp. 19-21. ISSN 2289-7488 (2018)

Comparing electricity selling prices. Energy Malaysia, 13. pp. 30-33. ISSN 2289-7488 (2017)

Digitalisation transforms global energy system efficiency. Sustainable Energy Malaysia, 4 (8). pp. 40-41. ISSN 2590-4000 (2020)

Driving the energy sector forward. Energy Malaysia, 18. pp. 8-12. ISSN 2289-7488 (2019)

E-rebates to promote energy efficiency. Energy Malaysia, 21. pp. 42-45. ISSN 2948-3603 (2021)

Economic spillover from biogas sector. Sustainable Energy Malaysia, 5 (13). pp. 20-23. ISSN 2590-4000 (2021)

Electrical and electronic. Retrospective 2020. pp. 20-21. (2020)

Electrifying below the wind the land. Energy Malaysia, 13. pp. 24-28. ISSN 2289-7488 (2013)

Energy auditing mastering green technology. Energy Malaysia, 16. pp. 32-34. ISSN 2289-7488 (2018)

Energy consumption info via web portal/ myTNB app. Energy Malaysia, 21. pp. 19-21. ISSN 2948-3603 (2021)

Energy efficiency in sustainable development. Sustainable Energy Malaysia, 5 (12). pp. 56-61. ISSN 2590-4000 (2022)

Energy efficiency taking up the challenge. Energy Malaysia, 18. p. 48. ISSN 2289-7488 (2019)

Enforcers of energy: keeping tabs on industry standards and compliance. Energy Malaysia, 18. pp. 37-38. ISSN 2289-7488 (2019)

Engagement with financial institutions key to renewable energy growth. Sustainable Energy Malaysia, 5 (11). pp. 24-26. ISSN 2590-4000 (2021)

Environmental technology. Retrospective 2019: Boosting industry, amplifying capability. pp. 9-11. (2019)

Expanding the gas supply network. Energy Malaysia, 17. pp. 24-26. ISSN 2289-7488 (2018)

Export growth in medical devices driven by innovation. MITI’s Recollective Global Edition (3). pp. 12-13. (2021)

Forecasting the energy industry. Energy Malaysia, 15. pp. 32-34. ISSN 2289-7488 (2018)

Further expansion of Germany’s Infineon Technologies AG hub in Kulim, Kedah: a testament to Malaysia’s strong electrical and electronics (E&E) ecosystem. Recollective Global (4). (2021)

Gas what? Energy Malaysia, 14. pp. 29-31. ISSN 2289-7488 (2018)

Governance and standards. Energy Malaysia, 18. pp. 21-23. ISSN 2289-7488 (2019)

Governance reform of single buyer and grid system operator. Energy Malaysia, 14. pp. 35-36. ISSN 2289-7488 (2018)

Green hydrogen a potential energy transition game changer. Sustainable Energy Malaysia, 4 (8). pp. 36-37. ISSN 2590-4000 (2020)

Green library in a garden. Sustainable Energy Malaysia, 4 (10). pp. 27-29. ISSN 2590-4000 (2021)

Harvesting organic wastes for biogas-based energy. Sustainable Energy Malaysia, 5 (12). pp. 43-45. ISSN 2590-4000 (2022)

Human capital development for RE sector. Sustainable Energy Malaysia, 4 (10). pp. 16-18. ISSN 2590-4000 (2021)

IGEM a commitment to going green. Energy Malaysia, 18. p. 46. ISSN 2289-7488 (2019)

Improving Sabah’s electricity supply industry: SESI stakeholders town hall session. Energy Malaysia, 16. pp. 46-47. ISSN 2289-7488 (2018)

Keeping up with the KPIs. Energy Malaysia, 15. pp. 15-18. ISSN 2289-7488 (2018)

Leading the energy sector through uncertainty. Energy Malaysia, 18. p. 47. ISSN 2289-7488 (2019)

Leading the nation towards sustainable energy. Sustainable Energy Malaysia, 5 (13). pp. 8-15. ISSN 2590-4000 (2021)

Let’s Get Smart. Energy Malaysia, 19. pp. 8-15. ISSN 2948-3603 (2019)

Living dangerously: are you using non-certified electrical products? Energy Malaysia, 20. pp. 26-29. ISSN 2948-3603 (2020)

Look for the stars. Energy Malaysia, 22. pp. 27-33. ISSN 2948-3603 (2022)

Looking forward to reforms. Energy Malaysia, 17. pp. 44-46. ISSN 2289-7488 (2018)

Maintaining gas installation safety explaining ati and ato. Energy Malaysia, 17. pp. 28-29. ISSN 2289-7488 (2018)

Malaysia moves towards low carbon mobility. Energy Malaysia, 22. p. 45. ISSN 2948-3603 (2022)

Maximising efficiency in energy usage. Energy Malaysia, 18. pp. 29-30. ISSN 2289-7488 (2019)

Mimos innovations. Retrospective 2020. pp. 10-15. (2020)

Mimos strategic roles. Retrospective 2020. pp. 16-19. (2020)

Nem 3.0 shines brighter light on solar growth. Sustainable Energy Malaysia, 5 (13). pp. 32-35. ISSN 2590-4000

Out with the old, in with the new: welcoming regulatory period 2. Energy Malaysia, 15. pp. 6-11. ISSN 2289-7488 (2018)

Outsmarting the culprits: cracking down on electricity theft with smart technology. Energy Malaysia, 18. pp. 39-40. ISSN 2289-7488 (2019)

Paving the future of the energy industry. Energy Malaysia, 15. pp. 35-36. ISSN 2289-7488 (2018)

Peer to peer (P2P) energy trading pilot project in Malaysia. Sustainable Energy Malaysia, 4 (8). pp. 30-32. ISSN 2590-4000 (2020)

Pencemaran ammonia dalam sumber air dan kesannya. Buletin LUAS, Edisi Okt-Dis 2016. p. 14. (2014)

Positive response for NOVA programme. Sustainable Energy Malaysia, 5 (11). pp. 38-40. ISSN 2590-4000 (2021)

Power generation: building on a strong legacy. Energy Malaysia, 19. pp. 42-45. ISSN 2948-3603 (2019)

Power to the people. Energy Malaysia, 20. pp. 34-39. ISSN 2948-3603 (2020)

Powering the biomass industry to greater heights. Sustainable Energy Malaysia, 4 (10). pp. 36-37. ISSN 2590-4000 (2021)

Raising biomass energy venture’s attraction via feed-in tariff. Sustainable Energy Malaysia, 5 (13). pp. 24-27. ISSN 2590-4000 (2021)

Reaching out to the masses. Energy Malaysia, 16. pp. 29-31. ISSN 2289-7488 (2018)

Reliable, sustainable affordable finding the balance in electricity prices. Energy Malaysia, 18. pp. 31-33. ISSN 2289-7488 (2019)

Renewable hydropower driving Sarawak development. Sustainable Energy Malaysia, 4 (8). pp. 22-24. ISSN 2590-4000 (2021)

Reshaping electricity supply industry. Energy Malaysia, 14. pp. 14-15. ISSN 2289-7488 (2018)

Revitalising mother nature: the energy commission commits to a greener Malaysia. Energy Malaysia, 18. p. 49. ISSN 2289-7488 (2019)

Revolutionising energy efficiency. Energy Malaysia, 16. pp. 22-25. ISSN 2289-7488 (2018)

Riding on hydro energy potential. Sustainable Energy Malaysia, 5 (13). pp. 28-30. ISSN 2590-4000 (2021)

SAIDI 100 Lab: powering up Sabah. Energy Malaysia, 15. pp. 24-27. ISSN 2289-7488 (2018)

Safety first! seminar on electrical design installation & safety first for lasting cable. Energy Malaysia, 17. p. 48. ISSN 2289-7488 (2018)

Sarawak energy - Petronas on hydrogen production venture. Sustainable Energy Malaysia, 4 (10). pp. 24-26. ISSN 2590-4000 (2021)

Scenario of future energy industry: Malaysian energy scenarios workshop. Energy Malaysia, 16. p. 48. ISSN 2289-7488 (2018)

Schools save RM154,000 at 2019 Energy Efficiency Challenge. Energy Malaysia, 20. pp. 40-45. ISSN 2948-3603 (2020)

Simplifying the complex. Energy Malaysia, 13. pp. 7-11. ISSN 2289-7488 (2017)

Small hydro in power generation. Sustainable Energy Malaysia, 5 (12). pp. 47-49. ISSN 2590-4000 (2022)

Small hydropower brings benefits to rural areas. Sustainable Energy Malaysia, 4 (10). pp. 41-43. ISSN 2590-4000 (2021)

Smart Selangor 2025. Energy Malaysia, 21. pp. 40-41. ISSN 2948-3603 (2021)

Smart grid systems: creating new opportunities. Energy Malaysia, 14. pp. 22-25. ISSN 2289-7488 (2018)

Strengthening processes and operations. Energy Malaysia, 15. pp. 28-31. ISSN 2289-7488 (2018)

Strengthening supply: enhancing energy security through competitive bidding. Energy Malaysia, 17. pp. 30-33. ISSN 2289-7488 (2018)

Successful collaborations in pursuit of net-zero emmissions. Sustainable Energy Malaysia, 5 (12). pp. 70-73. ISSN 2590-4000 (2022)

Supplying sustainable energy. Energy Malaysia, 16. pp. 14-17. ISSN 2289-7488 (2018)

Sustainable cities: when low carbon meets smart. Energy Malaysia, 21. pp. 34-39. ISSN 2948-3603 (2021)

Sustainably powering a nation. Energy Malaysia, 18. pp. 17-20. ISSN 2289-7488 (2019)

Switching on LED. Energy Malaysia, 19. pp. 16-19. ISSN 2948-3603

Transforming Malaysia into a serious solar player. Sustainable Energy Malaysia, 5 (12). pp. 33-36. ISSN 2590-4000 (2022)

Transitioning towards sustainable energy security. Energy Malaysia, 14. pp. 40-43. ISSN 2289-7488 (2018)

Unlocking the potential of Hydrogen. Energy Malaysia, 22. pp. 22-26. ISSN 2948-3603 (2022)

Weathering the pandemic: Malaysia’s medical devices industry at global frontline. MITI’s Recollective Global Edition (2). pp. 7-9. (2021)

What happens now? Energy Malaysia, 15. pp. 12-14. ISSN 2289-7488 (2018)

When ignorance can cause accidents, even deaths. Energy Malaysia, 22. pp. 16-18. ISSN 2948-3603 (2022)

Workplaces must be safe and healthy. No compromises! Energy Malaysia, 22. pp. 46-49. ISSN 2948-3603 (2022)

The challenges of a biodiesel implementation program in Malaysia. Processes, 8 (10): 1244. pp. 1-18. ISSN 2227-9717 (2020)

The digital revolution: the future of the energy industry. Energy Malaysia, 16. pp. 18-21. ISSN 2289-7488 (2018)

The future is... renewable energy. Energy Malaysia, 17. pp. 36-41. ISSN 2289-7488 (2018)

The greening of young minds. Energy Malaysia, 21. pp. 28-29. ISSN 2948-3603 (2021)

The heat is on. Sustainable Energy Malaysia, 5 (11). pp. 20-22. ISSN 2590-4000 (2021)

The journey to green: MSPI goes the distance in adopting RE technology. Sustainable Energy Malaysia, 5 (11). pp. 16-18. ISSN 2590-4000 (2021)

The not so tarif-fying truth on tariff. Energy Malaysia, 13. pp. 12-22. ISSN 2289-7488 (2017)

A projection of Malaysia’s energy landscape. Energy Malaysia, 18. pp. 13-16. ISSN 2289-7488 (2019)

The realities of building in the hot, humid tropics. Energy Malaysia, 21. pp. 46-49. ISSN 2948-3603 (2021)

The resilient renewable power markets. Sustainable Energy Malaysia, 4 (10). pp. 48-49. ISSN 2590-4000 (2021)

The smart way to power consumption. Energy Malaysia, 21. pp. 16-18. ISSN 2948-3603 (2021)

The state of gas: championing competencies in the gas industry. Energy Malaysia, 13. pp. 28-29. ISSN 2289-7488 (2017)

A technological change: artificial intelligence. Energy Malaysia, 15. pp. 20-23. ISSN 2289-7488 (2018)

A wake-up call for launderettes. Energy Malaysia, 19. pp. 20-23. ISSN 2948-3603 (2019)

PEDOT: PSS–modified platinum microelectrodes for measurements in aqueous media: effect of polymer surface area on long-term anodic peak current stability. IIUM Engineering Journal, 18 (2). pp. 11-15. ISSN 1511-788X (2017)

Investigation on different compositions of clay and water to the permeability of the silica sand used in greensand casting mould. Jurnal Kejuruteraan, 34 (4). pp. 749-752. ISSN 0128-0198 (2022)

Feasibility study of surrogate model for the application of vehicle suspension system. Journal of Transport System Engineering, 8 (1). pp. 15-28. ISSN 2289–9790 (2021)

Pavement condition analysis via vehicle mounted accelerometer data. IIUM Engineering Journal, 21 (1). pp. 73-84. ISSN 1511-788X (2020)

Properties of concrete containing blended cement and lightweight artificial aggregate. Malaysian Journal of Civil Engineering, 32 (2). pp. 59-68. ISSN 2600-9498 (2020)

Development of wireless power transfer system using resonance principle with security features. IIUM Engineering Journal, 18 (2). pp. 117-127. ISSN 1511-788X (2017)

Hydrogen production from ethanol dry reforming over lanthania-promoted Co/Al2O3 catalyst. IIUM Engineering Journal, 19 (1). pp. 24-33. ISSN 1511-788X (2018)

Study of MESH quality improvement for CFD analysis of an airfoil. IIUM Engineering Journal, 19 (2). pp. 203-212. ISSN 1511-788X (2018)

Mechanical and failure analysis of multi-materials adhesive joining. The International Journal of Integrated Engineering, 13 (7). pp. 160-166. ISSN 2229-838X (2021)

Renewable energy scenarios for sustainable electricity in Malaysia and the application of analytical hierarchy process (AHP) for decision-making. Jurnal Kejuruteraan, 34 (6). pp. 1271-1279. ISSN 0128-0198 (2022)

Performance evaluation of solar collectors using a solar simulator. IIUM Engineering Journal, 16 (2). pp. 79-90. ISSN 1511-788X (2015)

A brief account of river rehabilitation experiences. IIUM Engineering Journal, 18 (1). pp. 27-41. ISSN 1511-788X (2017)

Couette flow problem for an unsteady MHD third-grade fluid with hall currents. IIUM Engineering Journal, 15 (2). pp. 101-109. ISSN 1511-788X (2014)

Influence of green corrosion inhibitor on reinforced concrete attacked by magnesium sulphate. Malaysian Journal of Civil Engineering, 28 (2). pp. 73-87. ISSN 1823-7843 (2016)

Virtual prototype-based kinematic modeling and simulation of a multi-mode amphibious robot. IIUM Engineering Journal, 23 (2). pp. 246-256. ISSN 1511-788X (2022)

Improved constraint handling approach for predictive functional control using an implied closed-loop prediction. IIUM Engineering Journal, 22 (1). pp. 323-338. ISSN 1511-788X (2021)

Aeroelastic flutter analysis of supersonic wing with multiple external stores. IIUM Engineering Journal, 15 (2). pp. 1-11. ISSN 1511-788X (2014)

Level of awareness on lean thinking concept in construction among higher learning students in Malaysia. Malaysian Journal of Civil Engineering, 29 (1). pp. 94-107. ISSN 1823-7843 (2017)

Hydraulic conductivity and volumetric shrinkage properties review on gradation effect of compacted laterite soil liner. Malaysian Journal of Civil Engineering, 29 (1). pp. 153-164. ISSN 1823-7843 (2017)

Smart parking system mobile application using ultrasonic detector. The International Journal of Integrated Engineering, 14 (3). pp. 70-79. ISSN 2229-838X (2022)

Performance of energy regenerative suspension system through laboratory testing. Journal of Engineeringand Technology (JET), 7 (2). pp. 17-27. ISSN 2180-3811 (2016)

Dried leaves as potential adsorbent for removal of methylene blue. Journal of Engineering and Technology (JET), 11 (2). pp. 11-21. ISSN 2180-3811 (2020)

Pull-out resistance of sand-geosynthetics reinforcement. The International Journal of Integrated Engineering, 13 (3). pp. 87-93. ISSN 2229-838X (2021)

Thermal conductivity of lightweight concrete block with various cooling agent. The International Journal of Integrated Engineering, 12 (9). pp. 131-139. ISSN 2229-838X (2020)

Flexible rectenna for energy harvesting system. ELEKTRIKA- Journal of Electrical Engineering, 21 (1). pp. 73-77. ISSN 0128-4428 (2022)

Voltage instability analysis based on adaptive neuro-fuzzy inference system and probabilistic neural network. Journal of Engineeringand Technology (JET), 9 (2). pp. 27-40. ISSN 2180-3811 (2018)

Groundwater resources in Johor, Malaysia: resource potential and information management. Bulletin of the Geological Society of Malaysia, 43: 37. pp. 367-373. ISSN 0126-6187 (1999)

Carbonized green mussel shell as heavy metal removal. Malaysian Journal of Civil Engineering, 29 (1). pp. 56-68. ISSN 1823-7843 (2017)

Flight dynamics and control of A V-tail Camar UAV. Journal of Transport System Engineering, 7 (1). pp. 22-32. ISSN 2289–9790 (2020)

Evaluation of the W-metric routing using RPL protocol in LLNS. IIUM Engineering Journal, 19 (2). pp. 80-89. ISSN 1511-788X (2018)

Performance analysis of optimized screen-printed electrodes for electrochemical sensing. The International Journal of Integrated Engineering, 14 (3). pp. 250-261. ISSN 2229-838X (2022)

Automotive real-time data acquisition using wi-fi connected embedded system. ELEKTRIKA- Journal of Electrical Engineering, 18 (3-2). pp. 7-12. ISSN 0128-4428 (2019)

Modelling and optimization of energy efficient assembly line balancing using modified moth flame optimizer. The International Journal of Integrated Engineering, 14 (1). pp. 25-39. ISSN 2229-838X (2022)

Value problem solving at design stage of public construction projects in malaysia. Jurnal Jabatan Kerja Raya Malaysia (1). pp. 92-99. (2013)

Causes of delay in the planning and design phases for public works department construction projects. Malaysian Journal of Civil Engineering, 28 (3). pp. 481-502. ISSN 1823-7843 (2016)

Treatment domestic wastewater using UASB and DFAF two phase combined reactor systems: preliminary study. Journal of Engineering and Technology, 6 (2). pp. 1-8. ISSN 2180-3811 (2015)

Removal of reactive red 4 dye using chitosan- epichlorohydrin/ TiO2 nanocomposite: application of response surface methodology. Science Letters (ScL), 14 (1): 10. pp. 96-108. ISSN 2682-8626 (2020)

Oil palm biomass pretreatment and hydrolysis: a recent biotechnological venture towards bio-based lactic acid production. Jurnal Kejuruteraan, 34 (6). pp. 1287-1302. ISSN 0128-0198 (2022)

Reverse engineer 5 degrees of freedom robot arm using programmable logic controller. ELEKTRIKA- Journal of Electrical Engineering, 21 (1). pp. 42-47. ISSN 0128-4428 (2022)

Smart antennas for wireless communication systems. myCONVERGENCE, 1 (1). pp. 28-31. ISSN 1985-188X (2007)

A review on genetically engineered natural coagulant based on moringa oleifera for turbidity removal. Malaysian Journal of Civil Engineering, 28 (1). pp. 26-34. ISSN 1823-7843 (2016)

Dynamic simulation model of a hybrid electric ATV. Journal of Transport System Engineering, 8 (2). pp. 1-7. ISSN 2289–9790 (2021)

A review on the AC servomotor control systems. ELEKTRIKA- Journal of Electrical Engineering, 19 (23). pp. 22-39. ISSN 0128-4428 (2020)

Improved internal model control technique for position control of AC servo motors. ELEKTRIKA- Journal of Electrical Engineering, 19 (1). pp. 17-25. ISSN 0128-4428 (2020)

Customizing WLAN access point’s indoor coverage and throughput with corner reflector. ELEKTRIKA- Journal of Electrical Engineering, 19 (2). pp. 12-15. ISSN 0128-4428 (2020)

Development of design guideline for rural low volume roads in Malaysia. Jurnal Jabatan Kerja Raya Malaysia. pp. 29-35. (2013)

Behaviour of self-drilling screw upon single shear loading on cold formed steel. Malaysian Journal of Civil Engineering, 28 (1). pp. 59-68. ISSN 1823-7843 (2016)

FLAUT: a mutual sensitivity improvement through matched pipe, cavity and thin plate resonance. ELEKTRIKA- Journal of Electrical Engineering, 20 (2). pp. 42-48. ISSN 0128-4428 (2021)

Effect of putty properties in repairing corroded pipeline: a finite element analysis. Malaysian Journal of Civil Engineering, 28 (2). pp. 65-72. ISSN 1823-7843 (2016)

The behavior of non-destructive test for different grade of concrete. The International Journal of Integrated Engineering, 12 (9). pp. 1-8. ISSN 2229-838X (2020)

Properties of mortar incorporating spent garnet as fine aggregates replacement. The International Journal of Integrated Engineering, 12 (9). pp. 96-102. ISSN 2229-838X (2020)

Comparison of selected agro-based filter media for stormwater quality improvement. The International Journal ofIntegrated Engineering, 14 (1). pp. 251-259. ISSN 2229-838X (2022)

Malaysia’s national slope master plan – from theory to practice. Jurnal Jabatan Kerja Raya Malaysia. pp. 71-91. (2013)

Optimal economic and emission dispatch of photovoltaic integrated power system using firefly algorithm. The International Journal of Integrated Engineering (IJIE), 14 (3). pp. 50-62. ISSN 2229-838X (2022)

Numerical modelling of bird strike on aerospace structures by means of coupling FE-SPH. The International Journal of Integrated Engineering, 13 (7). pp. 185-193. ISSN 2229-838X (2021)

Review on IoT security and challenge in industry 4.0. Journal of Engineering and Technology (JET), 12 (1). pp. 63-80. ISSN 2180-3811 (2021)

Modified epoxy for fibre reinforced polymer strengthening of concrete structures. The International Journal of Integrated Engineering, 12 (9). pp. 103-113. ISSN 2229-838X (2020)

Dynamic hazard identification on SOFC system using bayesian network. The International Journal of Integrated Engineering, 14 (2). pp. 93-105. ISSN 2229-838X (2022)

The optimum field configuration for active MASW survey on peat soil. The International Journal of Integrated Engineering, 12 (9). pp. 121-130. ISSN 2229-838X (2020)

Role of substrate binding on the protein dynamics of an endoglucanase from fusarium oxysporum at different temperatures. IIUM Engineering Journal, 19 (1). pp. 307-314. ISSN 1511-788X (2018)

A review of downscaling methods for climate change impacts on water resources. Malaysian Journal of Civil Engineering, 29 (2). pp. 216-226. ISSN 1823-7843 (2017)

Air pollution index prediction using multiple neural networks. IIUM Engineering Journal, 18 (1). pp. 1-12. ISSN 1511-788X (2017)

Effect of alkaline treatment on properties of rattan waste and fabricated binderless particleboard. IIUM Engineering Journal, 19 (1). pp. 185-196. ISSN 1511-788X (2018)

High cycle fatigue in concrete through the theory of critical distances: from perspective of water-cement ratio. Malaysian Journal of Civil Engineering, 33 (3). pp. 79-83. ISSN 1823-7843 (2021)

Teknologi pelupusan lubang gerek: penyelesaian sisa DSRS bagi negara bukan kuasa nuklear. i-Nuklear (2). pp. 14-17. ISSN 2710-5628 (2021)

Biodegradation of mango seed starch films in soil. IIUM Engineering Journal, 23 (1). pp. 258-267. ISSN 1511-788X (2022)

Reduction of disc brake squeal noise through brake pad modification. Journal of Transport System Engineering, 7 (1). pp. 1-5. ISSN 2289–9790 (2020)

A review of boiler operational risks in empty fruit bunch fired biopower plant. Journal of Chemical Engineering and Industrial Biotechnology, 5 (5). pp. 29-35. ISSN 2600-7347 (2019)

The effects of cerium promoter on the performance of cobalt-based catalysts in fischer tropsch synthesis for liquid fuel production. IIUM Engineering Journal, 21 (2). pp. 1-11. ISSN 1511-788X (2020)

Electrochemical characterization of polylactic acid-block-poly (2-vinylpyridine)/gold nanoparticle composites for glucose biosensor development. IIUM Engineering Journal, 18 (2). pp. 34-41. ISSN 1511-788X (2017)

LSTM-based electroencephalogram classification on autism spectrum disorder. The International Journal of Integrated Engineering, 13 (6). pp. 321-329. ISSN 2229-838X (2021)

IoT e-waste monitoring system to support smart city initiatives. The International Journal of Integrated Engineering, 13 (2). pp. 1-9. ISSN 2229-838X (2021)

Performance of Electrical Discharge Machining (EDM) with nickel added dielectric fluid. IUM Engineering Journal, 19 (1). pp. 215-222. ISSN 1511-788X (2018)

Review of passive drag reduction techniques for bluff road vehicles. IIUM Engineering Journal, 15 (1). pp. 61-69. ISSN 1511-788X (2014)

A brief history of progress on nanotechnology: when will the ‘magic’ nanobullet shoot? Journal of Contemporary Social Science Research (JCSSR), 3 (1). pp. 13-15. ISSN 0127-984X (2018)

The effects of supercritical carbon dioxide on the degradation and antimicrobial properties of PLA biocomposite. IIUM Engineering Journal, 21 (1). pp. 212-227. ISSN 1511-788X (2020)

Vehicle accelerated corrosion test procedures for automotive in Malaysia. MATEC Web of Conferences 90, 90: 01040. pp. 1-7. ISSN 2261-236X (2016)

Defibrillators– the final choice to saving lifes. Jurutera Online: Additional Reports. (2022)

Patient safety-the role of biomedical engineering. Jurutera Online: Additional Reports. (2021)

Talk on ergonomics awareness. Jurutera Online: Additional Reports. (2018)

The trend of medical technology and healthcare engineering in the time of Covid-19. what is an engineer’s role? Jurutera Online: Additional Reports. (2020)

Obtaining hysteresis loops at low frequency for characterization of materials to be used in biomedical applications. IIUM Engineering Journal, 16 (1). pp. 19-32. ISSN 1511-788X (2015)

A study on health monitoring system: recent advancements. IIUM Engineering Journal, 15 (2). pp. 87-99. ISSN 1511-788X (2014)

Supercritical water gasification as a treatment for laboratory organic waste. Journal of Chemical Engineering and Industrial Biotechnology, 4. pp. 19-31. ISSN 2600-7347 (2018)

Improvement of problematic soil using crumb rubber tyre. IIUM Engineering Journal, 23 (2). pp. 72-84. ISSN 1511-788X (2022)

Portable and compact tire-clamping mechanism for medium sized tire. Journal of Transport System Engineering, 8 (1). pp. 36-40. ISSN 2289–9790 (2021)

Parallel hybrid electric vehicle simulation model using energetic macroscopic representation method. Journal of Transport System Engineering, 5 (1). pp. 7-12. ISSN 2289–9790 (2018)

Monitoring of deformation behaviour of unsaturated soil slope using distributed optical fibre sensor. The International Journal of Integrated Engineering, 12 (9). pp. 199-207. ISSN 2229-838X (2020)

Critical success factors for Building Information Modelling (BIM) implementation for power plant projects in Malaysia. IIUM Engineering Journal, 23 (1). pp. 34-45. ISSN 1511-788X (2022)

Pretreatment and bioprocess trials in various reactor system on lignocellulosic biomass for cellulosic biomaterials. Scientific Research Journal, 18 (2). pp. 1-15. ISSN 2289-649X (2021)

Effect of water on polypropylene/barium titanate nanocomposites. ELEKTRIKA- Journal of Electrical Engineering, 19 (2). pp. 53-58. ISSN 0128-4428 (2020)

Co-production of lactic acid and ethanol using Rhizopus sp. from hydrolyzed inedible cassava starch and leaves. IIUM Engineering Journal, 17 (2). pp. 1-10. ISSN 1511-788X (2016)

Chlorella vulgaris logistic growth kinetics model in high concentrations of aqueous ammonia. IIUM Engineering Journal, 19 (2). pp. 1-9. ISSN 1511-788X (2018)

Augmentative and alternative communication method based on tongue clicking for mute disabilities. IIUM Engineering Journal, 20 (1). pp. 119-128. ISSN 1511-788X (2019)

Structural analysis of hybrid VTOL configuration. Journal of Transport System Engineering, 7 (2). pp. 44-52. ISSN 2289–9790 (2020)

Evaluation of DC motors for clamping force mechanism in an electro-mechanical continuously variable transmission. Journal of Transport System Engineering, 6 (1). pp. 40-44. ISSN 2289–9790 (2019)

Robotic arm control using Internet of Things (IoT). ELEKTRIKA- Journal of Electrical Engineering, 18 (3-2). pp. 51-59. ISSN 0128-4428 (2019)

A ballast water treatment system using engine waste heat: is it viable? Journal of Transport System Engineering, 2 (3). pp. 31-36. ISSN 2289–9790 (2015)

Wastewater characterization and sequencing batch reactor operation for aerobic granular sludge cultivation. Malaysian Journal Of Civil Engineering, 31 (1). pp. 9-16. ISSN 1823-7843 (2019)

Challenges in textile wastewater and current palliative methods: an overview. IIUM Engineering Journal, 18 (2). pp. 71-78. ISSN 1511-788X (2017)

Predicting frictional losses generated by piston connecting-rod big end journal bearing for an internal combustion engine. Journal of Transport System Engineering, 6 (1). pp. 54-67. ISSN 2289–9790 (2019)

Modeling dispute management in construction industry. Malaysian Journal of Civil Engineering, 29 (1). pp. 1-14. ISSN 1823-7843 (2017)

Strength properties of 10 millimeters timber clinker aggregate concrete. Malaysian Journal of Civil Engineering, 29 (1). pp. 334-344. ISSN 1823-7843 (2017)

Water absorption and drying shrinkage of recycled foamed aggregate concrete. Malaysian Journal of Civil Engineering, 30 (3). pp. 482-492. ISSN 1823-7843 (2018)

A heuristic cascading fuzzy logic approach to reactive navigation for UAV. IIUM Engineering Journal, 15 (2). pp. 69-85. ISSN 1511-788X (2014)

Project management: lebuhraya pantai timur fasa 2 - a case study. Jurnal Jabatan Kerja Raya Malaysia. pp. 100-108. (2013)

New battery model integrating the internal resistance as a function of temperature. Journal of Transport System Engineering, 5 (1). pp. 37-41. ISSN 2289–9790 (2018)

Consolidation integrated buoyancy equation for soft ground improved with lightweight polyurethane foam. IIUM Engineering Journal, 23 (1). pp. 1-12. ISSN 1511-788X (2022)

The effect of layer thickness on repeatability of 3D printed PLA parts produced using openware 3D printer. IIUM Engineering Journal, 23 (2). pp. 218-227. ISSN 1511-788X (2022)

Drone detection and classification using passive forward scattering radar. The International Journal of Integrated Engineering, 14 (3). pp. 90-101. ISSN 2229-838X (2022)

A review of road embankment stability on soft ground: problems and future perspective. IIUM Engineering Journal, 20 (2). pp. 32-56. ISSN 1511-788X (2019)

Efficient capacitance sensing for wireless health monitoring systems. IIUM Engineering Journal, 17 (2). pp. 21-29. ISSN 1511-788X (2016)

Riverbank monitoring using image processing for early flood warning system via IoT. The International Journal of Integrated Engineering, 14 (3). pp. 166-174. ISSN 2229-838X (2022)

Effective & versatile compressed air delivery – portable DC air compressor technology. Jurutera Online: Additional Reports. (2018)

Report on ‘A practical engineering guide on adjustable fixing solutions’. Jurutera Online: Additional Reports. (2022)

Report on ‘Cellulosic passive fire protection fundamentals and structural fire design’. Jurutera Online: Additional Reports. (2022)

Development of Computer Aided Engineering (CAE) applications: past, present and future. Jurutera Online: Additional Reports. (2020)

Talk on precast concrete for buildings - a holistic approach. Jurutera Online: Additional Reports. (2018)

General material selection, case study and deep corrugated profile for commercial and industrial buildings. Jurutera Online: Additional Reports. (2020)

How to protect your assets with the right paint system. Jurutera Online: Additional Reports. (2020)

Micro vibration monitoring & structural engineering for vibration sensitivity equipment. Jurutera Online: Additional Reports. (2021)

Design of self-regulated flow control mechanism for a turbocharger gas stand test facility. Jurnal Mekanikal, 45. pp. 63-80. ISSN 2289-3873 (2022)

One day seminar on energy saving with advance motor control & protection technology. Jurutera Online: Additional Reports. (2018)

Talk on arc flash protection. Jurutera Online: Additional Reports. (2018)

Finite element modelling for fracture of multilayer fibrous networks. International Journal of Integrated Engineering, 12 (8). pp. 117-122. ISSN 2229-838X (2020)

Eco-hybrid composite failure behavior of two serial bolted joint holes. Journal of Engineering and Technology, 7 (1). pp. 114-124. ISSN 2180-3811 (2016)

The effect of stacking sequence on tensile properties of hybrid composite materials. Malaysian Journal of Civil Engineering, 28 (1). pp. 10-17. ISSN 1823-7843 (2016)

Tribological study of engine oil lubricant characteristics and its performance on 660cc engine. Journal of Transport System Engineering, 2 (1). pp. 37-40. ISSN 2289-9790 (2015)

An overview of propagation impairment mitigation techniques for satellite communication system. myCONVERGENCE, 6 (2). pp. 50-57. ISSN 1985-188X (2012)

Miniturize flexible RFID antenna design using metamaterial structure. ELEKTRIKA- Journal of Electrical Engineering, 18 (2). pp. 55-59. ISSN 0128-4428 (2019)

IoT smart agriculture for aquaponics and maintaining goat stall system. The International Journal of Integrated Engineering, 12 (8). pp. 240-250. ISSN 2229-838X (2020)

The green 'of' and 'by' ICT; the Malaysian effort. my CONVERGENCE, 6 (2). pp. 39-45. ISSN 1985-188X (2012)

Feasibility studies on utilization of low-pressure in hydro-pneumatic driveline. Journal of Engineeringand Technology (JET), 7 (7). pp. 28-42. ISSN 2180-3811 (2016)

Shape classification of harumanis mango using discriminant analysis (DA) and support vector machine (SVM). Journal of Engineering and Technology, 5 (2). pp. 93-104. ISSN 2180-3811 (2014)

Microbial Fuel Cell (MFC) in treating spent caustic wastewater. Journal of Chemical Engineering and Industrial Biotechnology, 3. pp. 17-25. ISSN 2600-7347 (2018)

Tribological analysis on the effect of heat transfer towards engine in-cylinder friction. Journal of Transport System Engineering, 6 (1). pp. 17-32. ISSN 2289–9790 (2019)

Screening and optimising metal salt concentration for harvesting nannochloropsis sp.by flocculation. Journal of Engineering and Technology, 6 (2). pp. 109-120. ISSN 2180-3811 (2015)

Material characterization and optimum usage of Coal Bottom Ash (CBA) as sand replacement against concrete properties. The International Journal of Integrated Engineering, 12 (9). pp. 9-17. ISSN 2229-838X (2020)

A bidirectional bending fiber-reinforced soft actuator robotic glove for finger rehabilitation. The International Journal of Integrated Engineering, 14 (2). pp. 47-54. ISSN 2229-838X (2022)

Impacts of climate change on rainfall trends under RCP scenarios in Johor, Malaysia. The International Journal of Integrated Engineering (IJIE), 14 (5). pp. 272-280. ISSN 2229-838X (2022)

Optimization of backpressure in exhaust muffler for automobile. Journal of Advanced Mechanical Engineering Applications (JAMEA), 2 (2). pp. 23-30. ISSN 2716-6201 (2021)

Optimization of red pigment production by monascus purpureus FTC 5356 using response surface methodology. IIUM Engineering Journal, 19 (1). pp. 34-47. ISSN 1511-788X (2018)

Do we need crumb rubber asphalt? Jurnal Jabatan Kerja Raya Malaysia. pp. 58-70. (2013)

Recent developments on computer aided fixture design: case based reasoning approaches. Advances in Mechanical Engineering, 6. pp. 1-15. ISSN 1687-8140 (2014)

Dual-wide band bended cloth antenna for ISM and WLAN applications. ELEKTRIKA- Journal of Electrical Engineering, 20 (2). pp. 49-52. ISSN 0128-4428 (2021)

Electricity usage monitoring based on internet of things. ELEKTRIKA- Journal of Electrical Engineering, 20 (3). pp. 37-42. ISSN 0128-4428 (2021)

Analysis of chemical compounds of agarwood oil from different species by Gas Chromatography Mass Spectrometry (GCMS). IIUM Engineering Journal, 15 (1). pp. 55-60. ISSN 1511-788X (2014)

Taguchi optimisation on effect of water environment in joining dissimilar AL5083 and AL6061-T6 aluminium alloy using friction stir welding. Jurnal Mekanikal, 45. pp. 39-52. ISSN 2289-3873 (2022)

Electrical and mechanical properties of silicone Electrical Conductive Adhesives (ECAs) filled carbon black treated with 3-aminotriethoxysilane at elevated temperature. The International Journal of Integrated Engineering, 14 (3). pp. 63-69. ISSN 2229-838X (2022)

Morphology and electrical characteristics of single-walled carbon nanotubes film prepared by air brush technique. The International Journal of Integrated Engineering, 14 (3). pp. 273-279. ISSN 2229-838X (2022)

Characteristics of vehicle headway during rainfall at night in Pontian,Johor. Malaysian Journal of Civil Engineering, 29 (1). pp. 59-74. ISSN 1823-7843 (2017)

Technical talk on biomass & plasma technologies for sustainabilty. Jurutera Online: Additional Reports. (2022)

Technical talk on recent development in 5G EMF policies, guideline, radiation measurement and monitoring. Jurutera Online: Additional Reports. (2022)

Influence of hardener / resin ratio towards frictional properties of fibre-reinforced epoxy composite laminates. Journal of Transport System Engineering, 7 (1). pp. 6-12. ISSN 2289–9790 (2020)

Ergonomics evaluation for turning machinists in oil and gas industry. The International Journal of Integrated Engineering, 14 (2). pp. 55-61. ISSN 2229-838X (2022)

Performance of high strength lightweight concrete using palm wastes. IIUM Engineering Journal, 19 (2). pp. 30-42. ISSN 1511-788X (2018)

Froude number variance with respect to the hydrodynamic response of a non-static vehicle on a low-lying flooded roadway. IIUM Engineering Journal, 22 (1). pp. 35-46. ISSN 1511-788X (2021)

Potential volumizing effect of the post-morph lime filler in attenuating concrete carbonation. IIUM Engineering Journal, 23 (1). pp. 13-33. ISSN 1511-788X (2022)

Optimum energy waste reduction for lighting energy consumption in Faculty of Electrical Engineering (FKE), Universiti Teknikal Malaysia Melaka (UTeM): a case study. Journal of Engineering and Technology (JET), 12 (2). pp. 95-114. ISSN 2180-3811 (2021)

Physical investigation of thionine-graphene nanocomposite synthesized using different concentrations of graphene oxide. Gading Journal of Science and Technology, 2 (1). pp. 66-74. ISSN 2637-0018 (2019)

Self-powered infusion micropump fabrication using xurography and thermal lamination techniques. The International Journal of Integrated Engineering, 14 (2). pp. 39-46. ISSN 2229-838X (2022)

Energy performance contracting initiative in Malaysian public hospitals. The International Journal of Integrated Engineering, 12 (9). pp. 234-245. ISSN 2229-838X (2020)

Face recognition on bag locking mechanism. ELEKTRIKA- Journal of Electrical Engineering, 18 (2). pp. 16-22. ISSN 0128-4428 (2019)

An innovative approach for environmental monitoring by solar powered kite. The International Journal of Integrated Engineering, 12 (5). pp. 257-265. ISSN 2229-838X (2020)

Tracking control of an electro-hydraulic actuator system using LQR-ZPETC controller. ELEKTRIKA- Journal of Electrical Engineering, 20 (2). pp. 8-13. ISSN 0128-4428 (2021)

Bioelectrochemical behavior of wild type bacillus cereus in dual chamber microbial fuel cell. IIUM Engineering Journal, 18 (2). pp. 79-86. ISSN 1511-788X (2017)

Development of a lock biometric authentication system for a battery powered locking device. International Journal of Integrated Engineering, 13 (2). pp. 16-23. ISSN 2229-838X (2021)

Bivariate flood frequency analysis using Gumbel Copula. Malaysian Journal of Civil Engineering, 30 (2). pp. 193-201. ISSN 1823-7843 (2018)

Effect of heat treatment on microstructure and mechanical properties of 6061 aluminum alloy. Journal of Engineering and Technology, 5 (1). pp. 89-98. ISSN 2180-3811 (2014)

Inverse kinematics solution for a 6-degree-of-freedom robotic manipulator based on FABRIK. Journal of Engineering and Technology (JET), 12 (2). pp. 71-83. ISSN 2180-3811 (2021)

Adsorption of heavy metals and residual oil from palm oil mill effluent using a novel adsorbent of alginate and mangrove composite beads coated with chitosan in a packed bed column. IIUM Engineering Journal, 19 (1). pp. 1-14. ISSN 1511-788X (2018)

The experience of the Faculty of Mechanical Engineering, Universiti Teknologi MARA, Malaysia, with accreditation by the UK Institution of Mechanical Engineers. International Journal of Mechanical Engineering Education, 37 (3). pp. 197-209. ISSN 0306-4190 (2009)

Energy consumption pattern of residential buildings: case study of residential area in Batu Pahat, Johor. The International Journal of Integrated Engineering, 12 (9). pp. 52-58. ISSN 2229-838X (2020)

Automated recycle dustbin system with GSM module for waste management. ELEKTRIKA- Journal of Electrical Engineering, 20 (2-3). pp. 56-64. ISSN 0128-4428 (2021)

Green synthesis of silver nanoparticles using sago (metroxylon sagu) via autoclaving method. IIUM Engineering Journal. pp. 178-184. ISSN 1511-788X

Design and analysis performance of fixed wing VTOL UAV. Journal of Transport System Engineering, 5 (1). pp. 17-25. ISSN 2289–9790 (2018)

Stress-strain relationship of fibre reinforced concrete exposed under elevated temperatures. Malaysian Journal of CivilEngineering, 29 (2). pp. 232-240. ISSN 1823-7843 (2017)

Investigation of bio flocculant as dewatering aid in sludge treatment. IIUM Engineering Journal, 19 (1). pp. 15-23. ISSN 1511-788X (2018)

Effects of pH, dosage and contact time on boron removal from synthetic saline water using moringa oleifera seeds. IIUM Engineering Journal, 21 (2). pp. 12-24. ISSN 1511-788X (2020)

Production and stability of myco-flocculants from lentinus squarrosulus RWF5 and simplicillium obclavatum RWF6 for reduction of water turbidity. IIUM Engineering Journal, 19 (1). pp. 48-58. ISSN 1511-788X (2018)

Purification and partial characterization of L-asparaginase enzyme produced by newly isolated bacillus sp. IIUM Engineering Journal, 18 (2). pp. 1-10. ISSN 1511-788X (2017)

Talk on 5G mobile networks. Jurutera Online: Additional Reports. (2018)

Design and efficiency studies on skimmers in an active grease trap. Journal of Engineering and Technology, 5 (1). pp. 121-133. ISSN 2180-3811 (2014)

Palm oil clinker as drainage layer in green roof system under Malaysia climatic conditions. Journal of Engineering and Technology, 5 (2). pp. 27-37. ISSN 2180-381 (2014)

Optimal biomass transportation model. Journal of Chemical Engineering and Industrial Biotechnology, 7 (1). pp. 23-31. ISSN 2600-7347 (2021)

Optimization of power quality monitors in transmission system network. ELEKTRIKA- Journal of Electrical Engineering, 16 (1). pp. 6-10. ISSN 0128-4428 (2017)

Report on design of slender tall buildings for wind & earthquake. Jurutera Online: Additional Reports. (2017)

Dynamic characteristics evaluation on portable steel frame due to mass irregularities. The International Journal of Integrated Engineering, 12 (9). pp. 27-35. ISSN 2229-838X (2020)

Optimization of surface roughness in deep hole drilling using moth-flame optimization. ELEKTRIKA- Journal of Electrical Engineering, 18 (3-2). pp. 62-68. ISSN 0128-4428 (2019)

The utilisation of palm oil and oil palm residues and the related challenges as a sustainable alternative in biofuel, bioenergy, and transportation sector: a review. Sustainability, 13 (6). pp. 1-25. ISSN 2071-1050 (2021)

MEMS-based oscillators: a review. IIUM Engineering Journal, 15 (1). pp. 1-15. ISSN 1511-788X (2014)

Rainfall runoff performance of small scale green roofs system. Malaysian Journal of Civil Engineering, 29 (1). pp. 91-99. ISSN 1823-7843 (2017)

Effect of feed flowrates on the physical properties and antioxidant of Mahkota Dewa (Phaleria Macrocarpa) encapsulated powder. IIUM Engineering Journal, 23 (2). pp. 1-9. ISSN 1511-788X (2022)

Talk on reinforced concrete corrosion evaluation and mitigation. Jurutera Online: Additional Reports. (2015)

A review of metal injection moulding on WC-Co cemented carbide comprised of Grain Growth Inhibitors (GGI). Journal of Science and Technology, 14 (1). pp. 84-101. ISSN 2229-8460 (2022)

Sensitivity identification of low-frequency cantilever fibre bragg grating accelerometer. The International Journal of Integrated Engineering, 13 (7). pp. 235-244. ISSN 2229-838X (2021)

Preliminary assessment of fire damaged reinforced concrete structure and steel truss. Malaysian Journal of Civil Engineering, 29 (2). pp. 195-204. ISSN 1823-7843 (2017)

Portable UV plasma air purifier in automobile. Journal of Transport System Engineering, 2 (2). pp. 42-45. ISSN 2289–9790 (2015)

New approach to predict fecal coliform removal for storm water biofilters application. IIUM Engineering Journal, 23 (2). pp. 58-45. ISSN 1511-788X (2022)

Evening talk on behavior and stability of cut slopes with special reference to Malaysia. Jurutera Online: Additional Reports. (2018)

Evening talk on “insurance in the construction industry”. Jurutera Online: Additional Reports. (2016)

The effect of quarry dust with cement by-products on properties of concrete. Malaysian Journal of Civil Engineering, 30 (3). pp. 415-428. ISSN 1823-7843 (2018)

Distributed fibre opticas sensor for corrosion detection in steel reinforcement. Malaysian Journal of Civil Engineering, 29 (2). pp. 132-144. ISSN 1823-7843 (2017)

Three dimension scanning using infrared coded light. ELEKTRIKA- Journal of Electrical Engineering, 19 (2). pp. 46-52. ISSN 0128-4428 (2020)

Structural assessment and strengthening of a cracked bridge pier. Jurnal Jabatan Kerja Raya Malaysia. pp. 51-57. (2013)

Talk on distribution automation project. Jurutera Online: Additional Reports. (2019)

Talk on sustainable building- what can an electrical engineer do? Jurutera Online: Additional Reports. (2019)

Talk on transformer predicted maintenance and diagnostic through insulating oil. Jurutera Online: Additional Reports. (2019)

Effects of poor communication in the construction industry in Klang Valley, Malaysia. Jurnal Kejuruteraan, 34 (5). pp. 837-841. ISSN 0128-0198 (2022)

Technical visit to Warisan Merdeka (new landmark for the nation), Kuala Lumpur. Jurutera Online: Additional Reports. (2017)

Design an interfacing tracking system in rehabilitation therapies between the elbow joint of the human arm and the prosthetic arm. International Journal of Integrated Engineering, 12 (9). pp. 54-60. ISSN 2229-838X (2020)

Thermo-elastohydrodynamic analysis of piston connecting-rod big end journal bearing lubrication system. Journal of Transport System Engineering, 7 (2). pp. 1-21. ISSN 2289–9790 (2020)

Assessment of the best probability distribution method in rainfall frequency analysis for a tropical region. Malaysian Journal of Civil Engineering, 33 (1). pp. 35-44. ISSN 1823-7843 (2021)

Classification of spike-wave discharge with STFT approach. Journal of Engineering and Technology, 5 (1). pp. 11-20. ISSN 2180-3811 (2014)

A comparative study on laminar flow of multiple orifice gases through a tubular welding electrode. Journal of Engineering and Technology, 5 (2). pp. 105-121. ISSN 2180-381 (2014)

Automotive consumerism in Malaysia with regard to car maintenance. Journal of the Society of Automotive Engineers Malaysia, 1 (2). pp. 137-153. ISSN 2550-2239 (2017)

Demulsification of crude oil emulsion via electrocoagulation method. Journal of Chemical Engineering and Industrial Biotechnology, 3. pp. 97-105. ISSN 2600-7347 (2018)

The key criteria in deciding to tender for construction projects. The International Journal of Integrated Engineering, 13 (3). pp. 229-235. ISSN 2229-838X (2021)

Integrating retrofit IOT controller with electric power system for manual wheelchair. Journal of Engineeringand Technology (JET), 11 (1). pp. 113-125. ISSN 2180-3811 (2020)

Characterization of palm oil ashes (POA) under impulse. Journal of Engineering and Technology, 5 (1). pp. 21-29. ISSN 2180-3811 (2014)

CFD analysis of flow, pollutant dispersion and thermal effect in street canyons. Journal of Engineering and Technology, 5 (1). pp. 99-120. ISSN 2180-3811 (2014)

Determining the solar radiation in Ayer Keroh, Melaka by using hargreaves method. Journal of Engineering and Technology, 5 (2). pp. 83-91. ISSN 2180-3811 (2014)

Engineering technology program in Malaysia: a market survey. Procedia - Social and Behavioral Sciences, 56: 56. pp. 448-453. ISSN 1877-0428 (2012)

Development of consolidated Sarawak geotechnical site investigation for Sarawak soil. The International Journal of Integrated Engineering, 12 (9). pp. 169-175. ISSN 2229-838X (2020)

Design concept of a motorcycle secondary electronic lock. International Journal of Integrated Engineering, 13 (7). pp. 1-8. ISSN 2600-7916 (2021)

Mechanical properties of lightweight concrete using palm oil clinker: an overview. Malaysian Journal of Civil Engineering, 29 (2). pp. 254-264. ISSN 1823-7843 (2017)

Analysis of the performance and impact of the rural electrification using solar hybrid system for rural schools in sabah, malaysia – case study. Jurnal Jabatan Kerja Raya Malaysia. pp. 45-50. (2013)

Amorphous structure in Cu-Zn-V-Al oxide composite catalyst for methanol reforming. IIUM Engineering Journal, 19 (1). pp. 197-214. ISSN 1511-788X (2018)

Finite element analysis of deep excavation problems. Jurutera Online: Additional Reports. (2017)

Design and development of size segregation sieve machine with centrifugal action. Universal Journal of Mechanical Engineering, 8 (4). pp. 208-215. ISSN 2332-3361 (2020)

The development of water pollution detector using conductivity and turbidity principles. IIUM Engineering Journal, 23 (2). pp. 104-113. ISSN 1511-788X (2022)

Modeling and optimization of electric discharge machining performances using harmony search algorithm. ELEKTRIKA- Journal of Electrical Engineering, 18 (3-2). pp. 56-61. ISSN 0128-4428 (2019)

Settlement measurement of soft soil by close range photogrammetry and particle image velocimetry technique. Malaysian Journal of Civil Engineering, 29 (1). pp. 15-24. ISSN 1823-7843 (2017)

Influence of fibreglass mesh on physical properties of lightweight foamcrete. IIUM Engineering Journal, 22 (1). pp. 23-34. ISSN 1511-788X (2021)

Lifetime extension of ageing offshore structures by Global Ultimate Strength Assessment (GUSA). Malaysian Journal of Civil Engineering, 30 (1). pp. 152-171. ISSN 1823-7843 (2018)

IoT based approach on aquarium monitoring system with fish feeder automation. Journal of Engineering and Technology (JET), 11 (2). pp. 1-10. ISSN 2180-3811 (2020)

Synthetic antimicrobial agent and antimicrobial fabrics: progress and challenges. IIUM Engineering Journal, 19 (2). pp. 10-29. ISSN 1511-788X (2018)

Clamping force adjustment system for a continuously variable transmission. Journal of Transport System Engineering, 5 (1). pp. 13-16. ISSN 2289–9790 (2018)

Spectrum absorbency of metamaterial perfect absorber. The International Journal of Integrated Engineering, 14 (1). pp. 215-222. ISSN 2229-838X (2022)

Design optimization & analysis of a soft crawling robot. The International Journal of Integrated Engineering, 13 (6). pp. 285-298. ISSN 2229-838X (2021)

Silicon compatible acoustic wave resonators: design, fabrication and performance. IIUM Engineering Journal, 15 (2). pp. 23-41. ISSN 1511-788X (2014)

Comparative study on several type of turbulence model available in ANSY-fluent software for ONERA M6 wing aerodynamic analysis. Journal of Advanced Mechanical Engineering Applications (JAMEA), 1 (1). pp. 9-19. ISSN 2716-6201 (2020)

Initial study on safety hazards by heavy transportation on Malaysian roads. The International Journal of Integrated Engineering, 14 (4). pp. 339-349. ISSN 2229-838X (2022)

Engineering geological of an active slope in KM46 Simpang Pulai, Perak. Malaysian Journal of Civil Engineering, 28 (1). pp. 35-41. ISSN 1823-7843 (2016)

Static and dynamic behaviour of Kuala Lumpur limestone. Malaysian Journal of Civil Engineering, 28 (1). pp. 18-25. ISSN 1823-7843 (2016)

Simulation and control of door lock system using PID controller. Journal of Advanced Mechanical Engineering Applications (JAMEA), 2 (2). pp. 31-52. ISSN 2716-6201 (2021)

Experimental study using recycled waste tyre as sustainable clay soil stabilization. The International Journal of Integrated Engineering (IJIE), 14 (5). pp. 122-129. ISSN 2229-838X (2022)

Estimating carbon sequestration of green roof plants in tropical climate. The International Journal of Integrated Engineering, 13 (3). pp. 200-206. ISSN 2229-838X (2021)

Biogas production under different inoculum to palm oil mill effluent ratio. Jurnal Kejuruteraan, 34 (6). pp. 1265-1269. ISSN 0128-0198 (2022)

Systematic literature review of role of applied geomatics in mapping and tracking corona virus. The International Journal of Integrated Engineering, 12 (8). pp. 251-256. ISSN 2229-838X (2020)

A comparative study on treatment technologies for sewage reclamation: a focus on the disinfection process. IIUM Engineering Journal, 21 (2). pp. 80-99. ISSN 1511-788X (2020)

Voltage instability analysis for electrical power system using voltage stabilty margin and modal analysis. Indonesian Journal of Electrical Engineering and Computer Science, 3 (3). pp. 655-662. ISSN 2502-4752 (2016)

Extraction and quantitative determination of ascorbic acid from banana peel Musa acuminata ‘Kepok’. IIUM Engineering Journal, 17 (1). pp. 103-114. ISSN 1511-788X (2016)

Mechanical properties of concrete contains waste tires exposed to high temperature. Malaysian Journal of Civil Engineering, 29 (2). pp. 221-231. ISSN 1823-7843 (2017)

Comparison of two total RNA extraction protocols from CHO-K1 cells for RT-PCR: cut-off cost for researchers. IIUM Engineering Journal, 15 (1). pp. 33-39. ISSN 1511-788X (2014)

Heating plates placement structure for optimal muscle stress relief with low power consumption. The International Journal of Integrated Engineering (IJIE), 14 (4). pp. 239-247. ISSN 2229-838X (2022)

Erosion characteristics of a medium sand breached embankment. Malaysian Journal of Civil Engineering, 29 (1). pp. 100-117. ISSN 1823-7843 (2017)

Design of a drop impact test rig for accelerometer validation for turbocharger application. Jurnal Mekanikal, 45. pp. 53-62. ISSN 2289-3873 (2022)

Systematic methodology for the design of binary solvent blends for extraction of herbal phytochemicals with cost evaluation. Journal of Chemical Engineering and Industrial Biotechnology, 4. pp. 60-89. ISSN 2600-7347 (2018)

Adopting industry 4.0 in construction industry. The International Journal of Integrated Engineering, 13 (7). pp. 27-33. ISSN 2229-838X (2021)

Earlier denaturation of DNA by using novel ternary hybrid nanoparticles. IIUM Engineering Journal, 23 (2). pp. 237-245. ISSN 1511-788X (2022)

The effect of dry mix sodium hydroxide onto workability and compressive strength of geopolymer paste. The International Journal of Integrated Engineering, 12 (9). pp. 114-120. ISSN 2229-838X (2020)

Environmental degradation of durian skin nanofibre biocomposite. IIUM Engineering Journal, 19 (1). pp. 223-236. ISSN 1511-788X (2018)

Cloud based storage application as a project information management tool for grade G5 contractors in Selangor. International Journal of Infrastructure Research and Management, 4 (1). pp. 10-19. ISSN 2811-3608 (2016)

Late payment practices in the Malaysian construction industry. Malaysian Journal of Civil Engineering, 28 (3). pp. 149-162. ISSN 1823-7843 (2016)

Autonomous agriculture robot for monitoring plant using internet of things. ELEKTRIKA- Journal of Electrical Engineering, 21 (1). pp. 14-19. ISSN 0128-4428 (2022)

Revisiting the financial issues and the impact to construction projects in Malaysia. Malaysian Journal of Civil Engineering, 33 (2). pp. 1-5. ISSN 1823-7843 (2021)

Effect of ferro electric thickness on Negative Capacitance FET (NCFET). IIUM Engineering Journal, 22 (1). pp. 339-346. ISSN 1511-788X (2021)

Simulation battery cooling system for small scale electric vehicle (light EV). Journal of Transport System Engineering, 8 (2). pp. 8-15. ISSN 2289–9790 (2021)

Performance of gasifier chamber unit by using agricultural waste. Jurnal Mekanikal, 44. pp. 1-11. ISSN 2289-3873 (2021)

An immersive augmented reality system to study the efficiency of dynamic exit signage. IIUM Engineering Journal, 23 (1). pp. 200-221. ISSN 1511-788X (2022)

Power estimation for a two seater helicopter. Journal of Transport System Engineering, 1 (1). pp. 55-66. ISSN 2289-9790 (2014)

Carbon dioxide sequestered concrete. The International Journal of Integrated Engineering, 12 (9). pp. 45-51. ISSN 2229-838X (2020)

Analysis of the Malaysian construction industry professional employee turnover antecedents. Jurnal Kejuruteraan, 34 (5). pp. 871-886. ISSN 0128-0198 (2022)

Water quality monitoring robot based on wireless sensor system. ELEKTRIKA- Journal of Electrical Engineering, 20 (2-3). pp. 35-41. ISSN 0128-4428 (2021)

Performance analysis of 5G path loss models for rural macro cell environment. IIUM Engineering Journal, 21 (1). pp. 85-99. ISSN 1511-788X (2020)

An enhanced packet scheduling algorithm for the downlink cognitive long term evolution-advanced. IIUM Engineering Journal, 21 (1). pp. 51-60. ISSN 1511-788X (2020)

A simulation study of drying chamber for marine product. The International Journal of Integrated Engineering, 13 (6). pp. 62-69. ISSN 2229-838X (2021)

Measurement of riverbank erosion rates of Pusu River using erosion pins method. The International Journal of Integrated Engineering, 13 (3). pp. 142-147. ISSN 2229-838X (2021)

Traditional values and their adaptation in social housing design: towards a new typology and establishment of ‘air house’ standard in Malaysia. Jurnal Jabatan Kerja Raya Malaysia. pp. 8-21. (2013)

Development of simvastatin production by monascus purpureus in solid-state fermentation using agricultural product. Journal of Engineering and Technology, 6 (2). pp. 18-28. ISSN 2180-3811 (2015)

Recovery of the biological active compounds of Musa Sp. through microwave assisted extraction. IIUM Engineering Journal, 18 (2). pp. 105-116. ISSN 1511-788X (2017)

Effects of diatomite as filler on the porous asphalt mixtures properties. Malaysian Journal of Civil Engineering, 29 (2). pp. 174-186. ISSN 1823-7843 (2017)

The tendency of nature towards hexagon shape formation due to minimizing surface energy. The International Journal of Integrated Engineering, 14 (1). pp. 40-47. ISSN 2229-838X (2022)

Effects of steel fibres on concrete properties and flexural behaviour of reinforced concrete slabs. Malaysian Journal of Civil Engineering, 29 (1). pp. 25-36. ISSN 1823-7843 (2017)

Effects of palm oil clinker as coarse aggregates replacement in self curing concrete. Malaysian Journal of Civil Engineering, 29 (2). pp. 241-253. ISSN 1823-7843 (2017)

A review: study on spent garnet as construction material. The International Journal of Integrated Engineering (IJIE), 14 (5). pp. 73-80. ISSN 2229-838X (2022)

Comparative study of multiple criteria decision making methods for selecting the best demand side management options. ELEKTRIKA- Journal of Electrical Engineering, 16 (1). pp. 11-16. ISSN 0128-4428 (2017)

Bond durability of steel plate to concrete prism using structural adhesives after exposure to 7-years in laboratory environment. Malaysian Journal of Civil Engineering, 29 (2). pp. 265-283. ISSN 1823-7843 (2017)

Chlorine decay simulation in water distribution system using EPANET. The International Journal of Integrated Engineering, 13 (3). pp. 94-99. ISSN 2229-838X (2021)

Smart current monitoring system with relay breaker. ELEKTRIKA- Journal of Electrical Engineering, 18 (3-2). pp. 37-41. ISSN 0128-4428 (2019)

Automatic irrigation system using wireless control. ELEKTRIKA- Journal of Electrical Engineering, 18 (3-2). pp. 42-46. ISSN 0128-4428 (2019)

Design and analysis of fixed offshore structure – an overview. Malaysian Journal of Civil Engineering, 28 (3). pp. 503-520. ISSN 1823-7843 (2016)

Unravel the extent of the existence of positive ground flash in Malaysia. International Journal of Emerging Trends in Engineering Research, 8 (1.1): 26. pp. 166-169. ISSN 2347 - 3983 (2020)

Optimization of flocculation process by microbial coagulant for removal of turbidity in river water. IIUM Engineering Journal, 18 (2). pp. 63-70. ISSN 1511-788X (2017)

Investigation of internal gas leakage on the gate valve using acoustic signal. The International Journal of Integrated Engineering, 14 (1). pp. 57-65. ISSN 2229-838X (2022)

Energy efficiency awareness and practices based on islamic perspectives. Journal of the Malaysian Institute of Planners, 20. pp. 159-170. ISSN 1675-6215 (2022)

The effectiveness of sodium polyacrylate as landscape catalyst. Journal of Engineeringand Technology (JET), 8 (2). pp. 135-148. ISSN 2180-3811 (2017)

Comparison of biodiesel properties produced from moringa oleifera seeds oil and palm oil. Journal of Engineering and Technology, 6 (1). pp. 36-44. ISSN 2180-3811 (2015)

Degradation of methylene blue using CuO prepared using conventional solid state method. Journal of Engineeringand Technology (JET), 10 (1). pp. 19-29. ISSN 2180-3811 (2019)

Project management practice and its effects on project success in Malaysian construction industry. IOP Conference Series: Materials Science and Engineering, 291. pp. 1-7. ISSN 1757-899X (2017)

Simulation of lovastatin production in solid-state fermentation via oil palm frond. Journal of Chemical Engineering and Industrial Biotechnology, 7 (2). pp. 7-10. ISSN 2600-7347 (2021)

Effect on thermal properties of Nanocellulose Fibre (NCF) reinforced biodegradable Polyhydroxylalkanoates (PHA) composite. Journal of Chemical Engineering and Industrial Biotechnology, 7 (1). pp. 10-13. ISSN 2600-7347 (2021)

Talk on “civil engineers’ role in green buildings”. Jurutera Online: Additional Reports. (2017)

Kapok as an adsorbent for industrial wastewater. Journal of Chemical Engineering and Industrial Biotechnology, 5 (2). pp. 48-54. ISSN 2600-7347 (2019)

Characterization and sintering properties of hydroxyapatite bioceramics synthesized from clamshell biowaste. IIUM Engineering Journal, 23 (2). pp. 228-236. ISSN 1511-788X (2022)

Pengurusan sisa radioaaktif di Malaysia, selamat atau tidak? i-Nuklear (2). pp. 2-9. ISSN 2710-5628 (2021)

Preliminary assessment of lakes water quality status at campus area in Selangor, Malaysia. Malaysian Journal of Civil Engineering, 28 (1). pp. 42-49. ISSN 1823-7843 (2016)

Geotechnical assessment of Palm Oil Fuel Ash (POFA) mixed with granite residual soil for hydraulic barrier purposes. Malaysian Journal of Civil Engineering, 28 (1). pp. 1-9. ISSN 1823-7843 (2016)

Evaluation of functionally graded architecture using fused filament fabrication technique for bone scaffold applications. The International Journal of Integrated Engineering, 14 (2). pp. 1-6. ISSN 2229-838X (2022)

Will cognitive radio take over spectrum management? myCONVERGENCE, 3 (1). pp. 29-33. ISSN 1985-188X (2009)

Influence of metallic strip reinforcement length and retained soil properties on the reinforced earth walls stability. Malaysian Journal of Civil Engineering, 33 (3). pp. 23-40. ISSN 1823-7843 (2021)

The properties of concrete containing palm oil fuel ash and expanded polystyrene beads. The International Journal of Integrated Engineering, 12 (9). pp. 78-86. ISSN 2229-838X (2020)

A grounded-theory study of civil engineering design practice in Malaysia. Journal of Civil Engineering Education, 146 (2): 04019004. pp. 1-16. ISSN 2643-9115 (2020)

Injection moulding simulation: the development of integral hinges test samples mould design via cadmould 3D-F. Journal of Advanced Mechanical Engineering Applications (JAMEA), 1 (1). pp. 1-8. ISSN 2716-6201 (2020)

The project manager's challenges during Covid-19 pandemic. Journal of Advanced Mechanical Engineering Applications (JAMEA), 2 (2). pp. 1-8. ISSN 2716-6201 (2021)

Quisy-SDS mempercepatkan proses pencarian maklumat keselamatan bahan kimia (Quisy-SDS accelerates the searching process of chemical safety datasheet). Jurnal Inovasi Malaysia (JURIM), 2 (2). pp. 123-139. ISSN 2600-7606 (2019)

Design and analysis of flexible bow-tie antenna for medical application. ELEKTRIKA- Journal of Electrical Engineering, 16 (1). pp. 17-21. ISSN 0128-4428 (2017)

Prediction of aerodynamic derivatives using Computational Fluid Dynamics (CFD)at transonic speed. Journal of Transport System Engineering, 4 (1). pp. 8-16. ISSN 2289–9790 (2017)

Fresh and hardened properties of self-compacting lightweight concrete using coarse palm oil clinker. Malaysian Journal of Civil Engineering, 29 (2). pp. 205-220. ISSN 1823-7843 (2017)

Neural network based system identification for quadcopter dynamic modelling: a review. Journal of Advanced Mechanical Engineering Applications (JAMEA), 1 (2). pp. 20-33. ISSN 2716-6201 (2020)

Adsorption of Rhodamine B by palm kernel shell adsorbents. Journal of Engineeringand Technology (JET), 7 (2). pp. 1-16. ISSN 2180-3811 (2016)

Investigation of glass plate failure mechanism subjected to copper and steel projectile impacts. IIUM Engineering Journal, 15 (1). pp. 17-31. ISSN 1511-788X (2014)

The effects of additives on the pelletization of raw and torrefied food waste. Journal of Chemical Engineering and Industrial Biotechnology (JCEIB), 7 (2). pp. 1-6. ISSN 2600-7347 (2021)

Evaluating the performance of unconfined compressive strength of trong clay stabilized with granite sludge. Journal of Engineeringand Technology (JET), 8 (2). pp. 149-160. ISSN 2180-3811 (2017)

Development of active idle stop system for automotive vehicle during uphill driving. Journal of Engineering and Technology, 7 (1). pp. 77-101. ISSN 2180-3811 (2016)

An analysis of energy mix in Peninsular Malaysia in line with the Malaysia's existing energy policy. Journal of Engineeringand Technology (JET), 7 (1). pp. 49-64. ISSN 2180-3811 (2016)

Review on eggshell waste in tissue engineering application. The International Journal of Integrated Engineering (IJIE), 14 (4). pp. 64-80. ISSN 2229-838X (2022)

Annualized electricity cost of residential solar PV system under Malaysia’s NEM scheme. ELEKTRIKA- Journal of Electrical Engineering, 19 (1). pp. 50-54. ISSN 0128-4428 (2020)

Conceptual design of remotely operated underwater vehicle. Journal of Transport System Engineering, 1 (2). pp. 15-19. ISSN 2289-9790 (2015)

Rechargeable battery system for small scale electric vehicle. Journal of Transport System Engineering, 8 (2). pp. 16-20. ISSN 2289–9790 (2021)

Internet of things monitoring system of a modeled cleanroom. ELEKTRIKA- Journal of Electrical Engineering, 20 (3). pp. 7-14. ISSN 0128-4428 (2021)

Online system for automatic tropical wood recognition. ELEKTRIKA- Journal of Electrical Engineering, 18 (3-2). pp. 1-6. ISSN 0128-4428 (2019)

Influence of alkali treatment on mechanical and morphological properties of single agave angustifolia fibre. Journal of Polymer Science and Technology, 6 (1). pp. 1-10. ISSN 2550-1917 (2021)

A review of wastewater bacterial bio oxidation: mechanisms, reactions, and behaviors. Journal of Chemical Engineering and Industrial Biotechnology, 7 (1). pp. 1-9. ISSN 2600-7347 (2021)

Behaviour of reinforced concrete deep beams with openings in the shear zones. Journal of Engineering and Technology, 6 (1). pp. 60-71. ISSN 2180-3811 (2015)

Performance analysis of fiber optic current sensor using sagnac interferometer. Journal of Engineering and Technology, 12 (2). pp. 55-69. ISSN 2289-814X (2021)

Influenced factors in the delignification process of red meranti wood sawdust. Journal of Chemical Engineering and Industrial Biotechnology, 3. pp. 26-36. ISSN 2600-7347 (2018)

Elemental and chemical composition of moringa oleifera husk extracts. Journal of Chemical Engineering and Industrial Biotechnology, 5 (5). pp. 74-78. ISSN 2600-7347 (2019)

Utilization of cockle shell(Anadara granosa) powder as partial replacement of fine aggregates in cement brick. The International Journal of Integrated Engineering, 12 (9). pp. 161-168. ISSN 2229-838X (2020)

Influence of Light Emitting Diode (LED) on microalgae. Journal of Chemical Engineering and Industrial Biotechnology, 5 (2). pp. 9-16. ISSN 2600-7347 (2019)

The hybrid photovoltaic-thermoelectric generator configurations for energy performance improvement. The International Journal of Integrated Engineering, 14 (3). pp. 1-13. ISSN 2229-838X (2022)

Characteristics of oxide layer formed on the aluminium (LM6) alloy and aluminium (ADC12) alloy during in-situ melting. Journal of Advanced Mechanical Engineering Applications (JAMEA), 2 (2). pp. 61-73. ISSN 2716-6201 (2021)

Nutrients and Chemical Oxygen Demand (COD) removals by microalgae–bacteria co-culture system in Palm Oil Mill Effluent (POME). IIUM Engineering Journal, 20 (2). pp. 22-31. ISSN 1511-788X (2019)

Peformance evaluation of petrochemical wastewater fed air-cathode microbial fuel cells using yeast biocatalyst. Journal of Chemical Engineering and Industrial Biotechnology, 4. pp. 32-42. ISSN 2600-7347 (2018)

Sustainable procurement in construction – the way forward for malaysia. Jurnal Jabatan Kerja Raya Malaysia. pp. 21-28. (2013)

Delivery and assessment method of bachelor of chemical engineering (environment) programme during the Covid-19 pandemic. International Journal of Practices in Teaching and Learning (IJPTL), 1 (2). pp. 1-5. ISSN 2773-5826 (2021)

Hybrid extendable linear actuators: design and applications. ELEKTRIKA- Journal of Electrical Engineering, 18 (3-2). pp. 13-16. ISSN 0128-4428 (2019)

Current deveploment on bioplastics and its future prosfects: an introductory review. i-TECH MAG, 1. 03-08. ISSN 2710-5873 (2019)

Recycled tire isolator as earth quake resistance system for single storey building in Malaysia. Malaysian Journal of Civil Engineering, 32 (2). pp. 29-35. ISSN 1823-7843 (2020)

The development of computational model through reverse engineering: side mirror case study. Journal of Mechanical Engineering and Technology, 1 (1). pp. 25-41. ISSN 2180-1053 (2009)

Sliding mode controller of automatic braking system. Journal of Engineering and Technology, 6 (2). pp. 88-108. ISSN 2180-3811 (2015)

Approximate function for unsteady aerodynamic kernel function of aeroelastic lifting surfaces. IUM Engineering Journal, 15 (1). pp. 71-79. ISSN 1511-788X (2014)

The machinability performance of RBD palm oil dielectric fluid on electrical discharge machining (EDM) of AISI D2 Steel. The International Journal of Integrated Engineering, 14 (1). pp. 140-149. ISSN 2229-838X (2022)

Structural behavior of lightweight composite slab system. The International Journal of Integrated Engineering, 13 (3). pp. 57-65. ISSN 2229-838X (2021)

Seminar on pavement technology in Malaysia – present & future. Jurutera Online: Additional Reports.

Impacts of covid-19 outbreak on civil engineering activities in the Malaysian construction industry: a review. Jurnal Kejuruteraan, 33 (3). pp. 477-485. ISSN 2289-7526 (2021)

Engineering geology in Malaysia. Bulletin of the Geological Society of Malaysia, 64. pp. 65-79. ISSN 2637-109X (2017)

In-situ noise measurement and analysis for the motorcycle muffler. International Journal of Integrated Engineering, 12 (9). pp. 44-53. ISSN 2229-838X (2020)

Resilient modulus of double layer porous asphalt: application of alkali treated coconut shell and fiber as aggregate replacement. Malaysian Journal of Civil Engineering, 29 (2). pp. 187-194. ISSN 1823-7843 (2017)

Two days course on bridge loading and concrete bridge design to Eurocodes. Jurutera Online: Additional Reports. (2016)

Vibration criteria assessment due to piling works. The International Journal of Integrated Engineering, 13 (3). pp. 46-56. ISSN 2229-838X (2021)

Vibration assessment on various distance to demolition works. The International Journal of Integrated Engineering, 12 (9). pp. 68-77. ISSN 2229-838X (2020)

Strengthening the palm oil biomass renewable energy industry in Malaysia. Renewable Energy, 60. pp. 107-115. ISSN 0960-1481 (2013)

Effect of cementation reagents concentrations on microbial calcite precipitation in residual soil. Malaysian Journal of Civil Engineering, 29 (1). pp. 79-90. ISSN 1823-7843 (2017)

A study towards implementation of public hub transportation: a case study of Penang Central. Journal of Transport System Engineering, 28 (1). pp. 1-6. ISSN 2289-9790 (2015)

Compression test and finite element analysis of foamed concrete cube. Journal of Engineering and Technology, 5 (1). pp. 1-9. ISSN 2180-3811 (2014)

Study of productivity improvement of manual operations in soya sauce factory. IIUM Engineering Journal, 21 (1). pp. 202-211. ISSN 1511-788X (2020)

Simulation study on the effect of asymmetric fin position on aerodynamic characteristic of a missile. Journal of Transport System Engineering, 2 (1). pp. 26-30. ISSN 2289-9790 (2015)

Influence of palm oil biomass clinker and empty fruit bunch fibers on concrete properties. IIUM Engineering Journal, 21 (2). pp. 100-110. ISSN 1511-788X (2020)

Coastal erosion index using AHP and ANN for coastal manager. Malaysian Journal of Civil Engineering, 34 (1). pp. 45-56. ISSN 1823-7843 (2022)

Time to rethink Consumption and the 3Rs. Energy Malaysia, 20. pp. 46-48. ISSN 2948-3603 (2020)

Identification of pharmaceutical residues in treated sewage effluents in Johor, Malaysia. Malaysian Journal of Civil Engineering, 29 (2). pp. 165-173. ISSN 1823-7843 (2017)

One day seminar on technology & selection of cast resin transformer. Jurutera Online: Additional Reports. (2018)

Performance analysis on dynamic wireless charging for electric vehicle using ferrite core. IIUM Engineering Journal, 23 (1). pp. 46-59. ISSN 1511-788X (2022)

Makanan diubahsuai secara genetik: adakah mendatangkan manfaat atau mengundang bahaya? Majalah Sains. ISSN 2682-8456 (2019)

Porous glass-ceramic composite from recycled soda lime silica glass and charcoal carbon. Journal of Engineering and Technology, 6 (2). pp. 143-150. ISSN 2180-3811 (2015)

Effect of mercury concentration and operating parameters on mercury removal using portable mercury removal rig for petrochemical wastewater. Journal of Engineering and Technology, 6 (1). pp. 111-120. ISSN 2180-3811 (2015)

Harmonic source identification in power distribution system and meter placement using network impedance approach. ELEKTRIKA- Journal of Electrical Engineering, 19 (2). pp. 40-45. ISSN 0128-4428 (2020)

Product-service solution inventory record for Malaysian palm oil argibusiness. Journal of Modern Manufacturing Systems and Technology, 4 (1). 8- 13. ISSN 2636-9575 (2020)

Investigation of magnetic properties for different coil sizes of dynamic wireless charging dads for Electric Vehicles (EV). IIUM Engineering Journal, 21 (1). pp. 23-32. ISSN 1511-788X (2020)

Preliminary study on current process of bus component inspection among public bus transport in Malaysia. Journal of Transport System Engineering, 1 (1). pp. 74-80. ISSN 2289-9790 (2014)

The optimum replacement of fine recycled concrete aggregate on the compressive and splitting tensile strength of the concrete. The International Journal of Integrated Engineering, 12 (9). pp. 18-26. ISSN 2229-838X (2020)

Effects of boundary layer scrapper on aerodynamic characteristics for automotive wind tunnel testing. Journal of Transport System Engineering, 2 (2). pp. 14-20. ISSN 2289–9790 (2015)

A survey on Internet of Vehicle (IoV): applications & comparison of VANETs ,IoV and SDN-IoV. ELEKTRIKA- Journal of Electrical Engineering, 20 (3). pp. 26-31. ISSN 0128-4428 (2021)

The effects of inclined shear reinforcement in reinforced concrete beam. Malaysian Journal of Civil Engineering, 30 (1). pp. 85-96. ISSN 1823-7843 (2018)

Word segmentation of output response for sign language devices. IIUM Engineering Journal, 21 (2). pp. 153-163. ISSN 1511-788X (2020)

Unmanned Aerial Vehicle (UAV)-based for slope mapping and the determination of potential slope hazard. The International Journal of Integrated Engineering, 14 (1). pp. 232-239. ISSN 2229-838X (2022)

Exploration of methods for slope stabilization influence by unsaturated soil. Malaysian Journal of Civil Engineering, 29 (2). pp. 121-131. ISSN 1823-7843 (2017)

Book Section

Tasik Chini: sustaining environmentally sensitive. In: Proceedings of the Colloquium on Lakes and Reservoir Management, 2007. National Hydraulic Research Institute of Malaysia (NAHRIM), Seri Kembangan, Selangor, pp. 41-45. ISBN 978-983-9429-02-2 (2008)

Energy & electricity consumption analysis of Malaysian power demand. In: 2010 4th International Power Engineering and Optimization Conference (PEOCO). IEEE, Shah Alam, Selangor, pp. 463-467. ISBN 978-1-4244-7128-7 (2010)

Opportunities and constraints of virtual reality application in international and domestic car companies of Malaysia. In: UKSim 14th International Conference on Modelling and Simulation. IEEE Xplore, Cambridge, United Kingdom, pp. 273-277. ISBN 978-0-7695-4682-7 (2012)

Issues affecting the sustainability of Loagan Bunut Lake, Sarawak. In: Proceedings of the Colloquium on Lakes and Reservoir Management, 2007. National Hydraulic Research Institute of Malaysia (NAHRIM), Seri Kembangan, Selangor, pp. 46-58. ISBN 978-983-9429-02-2 (2008)

Putrajaya Lake: sustainable management of created wetland. In: Proceedings of the Colloquium on Lakes and Reservoir Management, 2007. National Hydraulic Research Institute of Malaysia (NAHRIM), Seri Kembangan, Selangor, pp. 59-74. ISBN 978-983-9429-02-2 (2008)

National overview "the status of eutrophication of lakes in malaysia". In: Proceedings of the Colloquium on Lakes and Reservoir Management, 2007. National Hydraulic Research Institute of Malaysia, Seri Kembangan, Selangor, pp. 24-34. ISBN 978-983-9429-02-2 (2008)

Monograph

Co-generation: an energy efficient technology. Project Report. Energy Commission. (2019)

Estimation of the design rainstorm in peninsular Malaysia. Manual. Publications Unit, Ministry of Agriculture, Kuala Lumpur. (1994)

Field installation and maintenance of caprecorder 1598 digital event water level recorder. Manual. Ministry of Agriculture and Rural Development, Kuala Lumpur. (1974)

Field installation and maintenance of caprecorder 1599. Manual. Ministry of Agriculture and Fisheries, Kuala Lumpur. (1974)

Final report: reviewed and updated the hydrological procedure no.1– (estimation of design rainstorm in Peninsular Malaysia). Technical Report. Department of Irrigation and Drainage Malaysia, Seri Kembangan, Selangor. (2010)

General purpose event water level recorder. Manual. Publications Unit, Ministry of Agriculture and Fisheries, Kuala Lumpur. (1973)

Guide on electric vehicle charging system. Manual. Suruhanjaya Tenaga, Putrajaya, Malaysia.

Guide on minimum energy performance standards for electric rice cooker. Manual. Energy Commission, Putrajaya, Malaysia. (2020)

Guide on minimum energy performance standards for microwave oven. Manual. Energy Commission, Putrajaya, Malaysia. (2020)

Guide on minimum energy performance standards for television. Manual. Energy Commission. (2019)

Guideline for offshore floating facilities (GOFF). Manual. Petroliam Nasional Berhad, Kuala Lumpur.

Guidelines for approval of design scaffolding 2016. Manual. Department of Occupational Safety and Health, Putrajaya, Malaysia. (2016)

Guidelines for registration of competent firm (petroleum contractor). Manual. Department of Occupational Safety and Health, Putrajaya, Malaysia. (2018)

Guidelines for registration of persons with the chief inspector of factories and machinery as tower crane, passenger & material hoist, working platform and gondola competent persons. Manual. Department of Occupational Safety and Health, Putrajaya, Malaysia.

Guidelines for setting up custody transfer metering station at entry and exit points. Manual. Energy Commission, Putrajaya, Malaysia. (2018)

Guidelines for solar photovoltaic installation on net energy metering scheme. Manual. Energy Commission, Putrajaya, Malaysia. (2019)

Guidelines for solar photovoltaic installation under net offset virtual aggregations (NOVA) programme for Peninsular Malaysia. Manual. Suruhanjaya Tenaga, Putrajaya, Malaysia. (2020)

Guidelines for solar photovoltaic installation under the programme of NEM Rakyat and NEM GoMEn in Peninsular Malaysia. Manual. Energy Commission, Putrajaya, Malaysia. (2021)

Guidelines for the factories and machinery. Manual. Department of Occupational Safety and Health, Putrajaya, Malaysia. (2014)

Guidelines on advanced metering infrastructure. Manual. Energy Commission, Putrajaya, Malaysia. (2020)

Guidelines on electricity tariff determination under Incentive Based Regulation (IBR) for Peninsular Malaysia 2018. Manual. Energy Commission. (2018)

Guidelines on electricity tariff determination under incentive based regulation(IBR) for Peninsular Malaysia 2021. Manual. Suruhanjaya Tenaga, Putrajaya, Malaysia. (2021)

Guidelines on green electricity tariff. Manual. Suruhanjaya Tenaga, Putrajaya, Malaysia. (2022)

Guidelines on large scale solar photovoltaic plant for connection to electricity networks. Manual. Energy Commission, Putrajaya, Malaysia. (2020)

Guidelines on the use of PPE against chemical hazards. Manual. Department of Occupational Safety and Health, Putrajaya, Malaysia. (2005)

Hydrological station numbering system. Manual. Ministry of Agriculture and Fisheries, Kuala Lumpur. (1974)

Hydrological station registers. Manual. Ministry of Agriculture and Fisheries Malaysia, Kuala Lumpur. (1974)

Magnitude and frequency of floods in Malaysia. Manual. Drainage and Irrigation Department, Kuala Lumpur. (1974)

Magnitude and frequency of floods in peninsular Malaysia. Manual. Drainage and Irrigation Department, Kuala Lumpur. (1987)

Plastics and composites sector. Project Report. Academy of Sciences Malaysia, Kuala Lumpur, Malaysia. (2018)

Position paper on erosion and sedimentation. Project Report. Academy of Sciences Malaysia, Kuala Lumpur, Malaysia. (2017)

Rational method of flood estimation for rural catchments in Peninsular Malaysia. Manual. Irrigation and Drainage Department, Kuala Lumpur. (1989)

Stage discharge curves. Manual. Ministry of Agriculture, Kuala Lumpur. (1976)

Strategies for the sustainable development and management of lakes and reservoirs in Malaysia. Manual. Academy of Sciences Malaysia, Kuala Lumpur. (2009)

Water quality sampling for surface water. Manual. Publications Unit, Ministry of Agriculture and Fisheries, Kuala Lumpur. (1973)

MIROS traffic crash investigation. Technical Report. Malaysian Institute of Road Safety Research (MIROS), Kajang, Selangor. (2014)

A law for nanotechnology in Malaysia. Project Report. Universiti Teknologi MARA, Shah Alam, Shah Alam, Selangor. (2008)

Dual elements isolated magnetic dipole MIMO antenna with semi circular slot structure for isolation enhancement. Project Report. Research Management Institute (RMI), Dungun, Terengganu. (Unpublished) (2020)

Coastal zone stabilisation, restoration and enhancement through mangrove forest establishment. Technical Report. Institut Penyelidikan Air Kebangsaan Malaysia (NAHRIM), Seri Kembangan, Selangor. (2004)

A study on knowledge and attitude of different level of education regarding biotechnology application in Malacca. Project Report. Universiti Teknologi MARA, Cawangan Melaka, Jasin, Melaka. (Unpublished) (2015)

Development of QPEC (Questionnaires Package for Engineering Curriculum) and SAS (Statistical Analysis System) to analyse the survey [case study: Market survey for curriculum development of Bachelor Engineering (hons) in Mechanical (Manufacturing)]. Project Report. Universiti Teknologi MARA, Shah Alam, Shah Alam, Selangor. (Unpublished) (2006)

Technical visit to 3.3 MW Ulu kanchung biogas power plants in Rembau, Negeri Sembilan. Technical Report. The Institution of Engineers Malaysia, Petaling Jaya, Selangor. (2019)

Process safety accident analysis in process chemical industries. Project Report. Universiti Teknologi MARA, Cawangan Terengganu, Dungun, Terengganu. (Unpublished)

Bioremediation of azo dyes by using pseudomonas sp. Project Report. Universiti Teknologi MARA, Cawangan Negeri Sembilan, Kuala Pilah, Negeri Sembilan. (Unpublished) (2015)

Analysis on fuel properties of cerium oxide additive in algae biodiesel by using optimization tools. Project Report. Universiti Teknologi MARA, Cawangan Pulau Pinang, Permatang Pauh, Pulau Pinang. (Unpublished) (2020)

A study of effect to the water pumping system powered by pv solar by removing the battery storage. Project Report. Research Management Institute (RMI), Dungun, Terengganu. (Unpublished) (2020)

Optimization and experimental investigations of fuel properties with algae biodiesel using design expert software. Project Report. Universiti Teknologi MARA, Cawangan Pulau Pinang, Permatang Pauh, Pulau Pinang. (Unpublished) (2020)

Nanotechnology: a law for Malaysia. Project Report. Universiti Teknologi MARA, Shah Alam, Shah Alam, Selangor. (Unpublished) (2014)

Factors influence customer acceptance towards food biotechnology product. Project Report. Universiti Teknologi MARA, Cawangan Melaka, Melaka. (Unpublished) (2009)

Nanotechnology in cosmetics: the legal challenges in Malaysia. Project Report. Universiti Teknologi MARA, Shah Alam, Shah Alam, Selangor. (Unpublished) (2008)

Investigating soil trafficability in kerian paddy areas. Technical Report. Institut Penyelidikan Air Kebangsaan Malaysia (NAHRIM), Seri Kembangan, Selangor. (2008)

Electrochemical properties of MWCNTs-polypyrrole nanocomposite films prepared by AC-EPD technique. Project Report. Universiti Teknologi MARA, Cawangan Pulau Pinang, Pematang Pauh, Pulau Pinang. (Unpublished) (2017)

Sustainable treatment of waste water from agro-food industry. Technical Report. The Institution of Engineers Malaysia, Petaling Jaya, Selangor. (2021)

Biofuel from cultured algae. Project Report. Universiti Teknologi MARA, Shah Alam, Shah Alam, Selangor. (Unpublished) (2009)

Integrated lake basin management and its importance for Lake Chini and other lakes in Malaysia. Technical Report. Blackwell Publishing Asia Pty Ltd, Seri Kembangan, Selangor. (2009)

Supercritical carbon dioxide extraction as a green technology for Chromolaena odorata leaves. Project Report. Universiti Teknologi MARA, Cawangan Pulau Pinang, Pematang Pauh, Pulau Pinang. (Unpublished) (2017)

Modeling of compound channel for optimum river storage capacity. Technical Report. Institut Penyelidikan Air Kebangsaan Malaysia (NAHRIM), Seri Kembangan, Selangor. (2004)

Conference or Workshop Item

Pedestrian protection assessment in ASEAN NCAP: future consideration. In: Southeast Asia Safer Mobility Symposium 2013, 21 October 2013, Road Transport Academy (APJ), Melaka, Malaysia. (In Press) (2013)

Electric motorcycle risks on roads: an overview. In: Southeast Asia Safer Mobility Symposium 2013, 21 October 2013, Road Transport Academy (APJ), Melaka, Malaysia. (In Press) (2013)

Pengenalan dan peranan Suruhanjaya Tenaga. In: Selected Elements on the Compliance to the Electrical Supply Act 447 and Electrical Regulations, 19 September 2021. (2021)

Can internet usage ease the process of learning engineering subjects?: a study on students of diploma in mechanical engineering. In: STSS 2004 : Prosiding Seminar Kebangsaan Sains Teknologi & Sains Sosial / Jilid 2 : Sains Sosial, 31 Mei – 1 Jun 2004, Hotel Vistana, Kuantan, Pahang. (In Press) (2004)

Electrical installation standards & regulations in Peninsular Malaysia & Sabah. In: Webinar IEM Southern Branch 2021: Electrical Safety Manual, 19 September 2021. (2021)

Accreditation of coastal hydraulic software: are we ready? In: 5th IEM Water Resources Colloquium, 5 July 2003, IEM, P.J.. (2003)

A review of automated emergency braking system and the trending for future vehicles. In: Southeast Asia Safer Mobility Symposium 2013, 21 October 2013, Road Transport Academy (APJ), Melaka, Malaysia. (In Press) (2013)

Consumers’ perception of vehicle safety features in four ASEAN countries. In: Southeast Asia Safer Mobility Symposium 2013, 21 October 2013, Road Transport Academy (APJ), Melaka, Malaysia. (In Press) (2013)

How does NCAP for ASEAN help the region’s road safety index? In: Southeast Asia Safer Mobility Symposium 2013, 21 October 2013, Road Transport Academy (APJ), Melaka, Malaysia. (In Press) (2013)

Developed nation in 2020: Malaysia’s road safety and modernization threats. In: Southeast Asia Safer Mobility Symposium 2013, 21 October 2013, Road Transport Academy (APJ), Melaka, Malaysia. (In Press) (2013)

Development of driving simulator for In-Vehicle Information System (IVIS) evaluation: progress & challenges. In: Southeast Asia Safer Mobility Symposium 2013, 21 October 2013, Road Transport Academy (APJ), Melaka, Malaysia. (In Press) (2013)

Review of on-road approaching motorcycle detection and tracking techniques. In: Southeast Asia Safer Mobility Symposium 2013, 21 October 2013, Road Transport Academy (APJ), Melaka, Malaysia. (In Press) (2013)

Analysis of Malaysian pregnant driver with restraint system during automotive collision of a multi-purpose vehicle. In: Southeast Asia Safer Mobility Symposium 2013, 21 October 2013, Road Transport Academy (APJ), Melaka, Malaysia. (In Press) (2013)

Making RSPO work throughout the supply chain. In: MPOB International Palm Oil Conference, 15-17 November 2011, Kuala Lumpur Convention Center. (2021)

Safety characteristics of motorcycle lighting. In: Southeast Asia Safer Mobility Symposium 2013, 21 October 2013, Road Transport Academy (APJ), Melaka, Malaysia. (In Press) (2013)

Droughts in malaysia: a look at its characteristics, impacts, related policies and management strategies. In: Water and Drainage 2003 Conference, 28-29 April 2003, Kuala Lumpur, Malaysia. (2003)

Prevalence study of motorcycle lightings and conspicuity. In: Southeast Asia Safer Mobility Symposium 2013, 21 October 2013, Road Transport Academy (APJ), Melaka, Malaysia. (In Press) (2013)

Geotechnical challenges with Malaysian peat. In: The School of Computing and Technology 2nd Annual Conference, 2007, 2007, London. (In Press) (2007)

Book

UNSPECIFIED, ed. ASM position paper on precision medicine initiative in Malaysia. Academy of Sciences Malaysia, Kuala Lumpur, Malaysia. ISBN 978-983-2915-55-3 (2020)

UNSPECIFIED, ed. Bioteknologi dan kita. Kementerian Sains, Teknologi dan Inovasi (MOSTI), Putrajaya, Malaysia. (2018)

UNSPECIFIED, ed. Garis panduan latihan pekerja, pendaftaran pusat pengajar dan pengendalian kursus keselamatan dan kesihatan pekerjaan di ruang terkurung. Department of Occupational Safety and Health, Putrajaya, Malaysia. ISBN 978-983-2014-59-1 (2008)

UNSPECIFIED, ed. Garis panduan pendawaian elektrik pepasangan domestik. 3rd ed. Suruhanjaya Tenaga, Putrajaya, Malaysia. ISBN 978-967-2085-11-9 (2016)

UNSPECIFIED, ed. Guide to efficient use of electricity at home. 2nd ed. Suruhanjaya Tenaga, Putrajaya, Malaysia. ISBN 978-967-19778-9-5 (2020)

UNSPECIFIED, ed. Guidelines for asbestos removal 2017. Department of Occupational Safety and Health, Putrajaya, Malaysia. ISBN 978-983-2014-89-8 (2017)

UNSPECIFIED, ed. Guidelines for industrial gas cylinder: design, construction, handling, inspection and testing. Department of Occupational Safety and Health, Shah Alam, Selangor. ISBN 978-967-19762-0-3 (2021)

UNSPECIFIED, ed. Guidelines for the preparation of a chemical register. Department of Occupational Safety and Health, Putrajaya, Malaysia. ISBN 983-2014-07-7 (2000)

UNSPECIFIED, ed. Guidelines in mercury management in oil and gas industry 2011. Department of Occupational Safety and Health, Putrajaya, Malaysia. ISBN 978-983-2014-74-4 (2011)

UNSPECIFIED, ed. Guidelines on chemical management in health care facilities Ministry of Health. Ministry of Health Malaysia, Putrajaya. ISBN 978-983-3433-76-6 (2010)

UNSPECIFIED, ed. Guidelines on control and safe handling of nanomaterials 2018. Department of Occupational Safety and Health, Putrajaya, Malaysia. ISBN 978-983-2014-95-9 (2018)

UNSPECIFIED, ed. Guidelines on control of chemicals hazardous to health. Department of Occupational Safety and Health, Putrajaya, Malaysia. ISBN 983-2014-10-7 (2001)

UNSPECIFIED, ed. Guidelines on control of molds contamination and remediation 2019. Department of Occupational Safety and Health, Putrajaya, Malaysia. ISBN 978-967-16706-5-1 (2019)

UNSPECIFIED, ed. Guidelines on gas piping systems at launderettes and similar installations. Energy Commission, Putrajaya, Malaysia. ISBN 978-967-2085-08-9 (2020)

UNSPECIFIED, ed. Guidelines on monitoring of airborne chemical hazardous to health 2022. Department of Occupational Safety and Health, Putrajaya, Malaysia. ISBN 978-967-19762-4-1 (2022)

UNSPECIFIED, ed. Guidelines on safe management of ammonia refrigeration system. Department of Occupational Safety and Health, Putrajaya, Malaysia. ISBN 978-967-18951-0-8 (2020)

UNSPECIFIED, ed. Guidelines on safe use of press machines. Department of Occupational Safety and Health, Putrajaya, Malaysia. ISBN 978-983-2014-80-5 (2015)

UNSPECIFIED, ed. Guidelines on storage of hazardous chemicals: a guide for safe warehousing of packaged hazardous chemicals. Department of Occupational Safety and Health, Putrajaya, Malaysia. ISBN 983-2014-54-9 (2005)

Mohd Yunus, Mohd Ali Hanafiah, ed. Internet of things (IOT) technical regulatory aspects & key challenges: technical report. Malaysian Communications and Multimedia Commission, Cyberjaya, Selangor. ISBN 978-967-13284-9-1 (2018)

UNSPECIFIED, ed. Low carbon mobility blueprint 2021-2030: decarbonizing land transportation. 1st ed. Ministry of Environment and Water (KASA), Putrajaya, Malaysia. ISBN 978-967-19266-7-3 (2021)

UNSPECIFIED, ed. Malaysian Aerospace Industry Blueprint 2030. Malaysian Industry Government Group for High Technology, Kuala Lumpur, Malaysia, pp. 1-48. ISBN 978-967-11818-6-7 (2015)

UNSPECIFIED, ed. Manual of recommended practice on the assessment of the health risks arising from the use of chemicals hazardous to health at the workplace. 3rd ed. Department of Occupational Safety and Health, Putrajaya, Malaysia. ISBN 978-983-2014-90-4 (2018)

UNSPECIFIED, ed. Manual on simple risk assessment and control for chemicals (SiRAC). Department of Occupational Safety and Health, Putrajaya, Malaysia. ISBN 978-967-16706-1-3 (2019)

UNSPECIFIED, ed. Meet Malaysia: investment opportunities in Asia’s oil and gas hub. Malaysian Investment Development Authority (MIDA), Kuala Lumpur, Malaysia. (2020)

UNSPECIFIED, ed. Panduan menjalankan penaksiran risiko bahan kimia berbahaya kepada kesihatan secara generik 2021. 3rd ed. Department of Occupational Safety and Health, Putrajaya, Malaysia. ISBN 978-967-19762-2-7 (2021)

UNSPECIFIED, ed. Position paper on hydrogen economy. Academy of Sciences Malaysia, Kuala Lumpur, Malaysia. ISBN 978-983-2915-83-6 (2020)

UNSPECIFIED, ed. Program pemuliharaan pendengaran. Institut Keselamatan dan Kesihatan Pekerjaan Negara (NIOSH), Bangi, Selangor. ISBN 978-967-13946-8-7 (2017)

UNSPECIFIED, ed. Study on the current issues and needs for water supply and wastewater management in Malaysia. Academy of Sciences Malaysia, Kuala Lumpur, Malaysia. ISBN 978-983-2915-25-6 (2015)

UNSPECIFIED, ed. Study on the status of climate change impact on water-related issues (final report). Academy of Sciences Malaysia, Kuala Lumpur, Malaysia. ISBN 978-983-9445-66-44 (2010)

UNSPECIFIED, ed. Sustainable mining: case study for bauxite mining in Pahang. Academy of Sciences Malaysia, Kuala Lumpur, Malaysia. ISBN 978-983-2915-34-8 (2017)

UNSPECIFIED, ed. A study on the current status and needs assessment of water resources research in Malaysia. Academy of Sciences Malaysia, Kuala Lumpur, Malaysia. (2014)

UNSPECIFIED, ed. A study on the status and issues on integrated river basin management (IRBM) in Malaysia 2014. Academy of Sciences Malaysia, Kuala Lumpur, Malaysia. ISBN 978-983-2915-19-5 (2014)

Abdullah, Shahrizaila Ensuring a better water future for Malaysia. Academy of Sciences Malaysia, Kuala Lumpur, Malaysia. ISBN 978-983-2915-31-7 (2016)

Mohd Jawi, Zulhaidi and Solah, Mohd Syazwan and Ariffin, Aqbal Hafeez and Shabadin, Akmalia and Ali, Azhani and Osman, Mohd Rasid and Wong, Shaw Voon Automotive consumerism: a study of car user’s practices & behaviour in Klang Valley, Malaysia. Malaysian Institute of Road Safety Research (MIROS), Kajang, Selangor. ISBN 978-967-2078-11-1 (2017)

Thesis

Enhanced dielectric properties of filled PVDF/MgO polymer nanocomposite. Masters thesis, Universiti Teknologi MARA, Shah Alam. (2015)

Pharmaceuticals as potential chemical markers in wastewater. Masters thesis, Universiti Teknologi MARA, Shah Alam. (2014)

Statistical approach toward achieving green cloud computing in virtualized single server environment. Doctoral thesis, Universiti Teknologi MARA, Shah Alam. (2020)

Microstrip yagi antenna’s design and analysis for wireless LAN application. Other thesis, Universiti Teknologi MARA, Dungun Campus. (2015)

Experimental study of waste vegetable oil as a biofuel. Degree thesis, Universiti Teknologi MARA, Shah Alam. (2009)

Voltage and load profiles estimation of distribution network using independent component analysis. Masters thesis, Universiti Teknologi MARA, Shah Alam. (2014)

Chemical modification of brown macro algae Padina sp. as a potential biosorbent for the removal of heavy metals in aqueous solution. Masters thesis, Universiti Teknologi MARA, Shah Alam. (2016)

Rapid expansion supercritical solution (RESS) carbon dioxide as a green technology for ginger rhizome solid oil particles formation. Masters thesis, Universiti Teknologi MARA, Shah Alam. (2016)

A comparison study on different methods in building construction activity towards waste minimization. Masters thesis, Institut Sains Biologi. (2011)

Safety engineering in faculty of Mechanical Engineering's laboratories. Degree thesis, Universiti Teknologi MARA, Shah Alam. (2009)

Performance of normal and nanomaterial Li(1+x)Mn2O4 for battery applications. Masters thesis, Universiti Teknologi MARA, Shah Alam. (2010)

Nanocomposite polymer gel electrolyte based on LiBOB-cellulose acetate for lithium-oxygen battery. Doctoral thesis, Universiti Teknologi MARA, Shah Alam. (2016)

Video

5 lagi kolam takungan air akan dibina libatkan 3 daerah di Terengganu. [Video] (2019)

Abang Jo mahu lebih ramai saintis tempatan. [Video] (2022)

Aduan Rakyat | 5 tan sisa e-waste dibawa keluar. [Video] (2020)

Bahan api biodiesel generasi kedua, biojet. [Video] (2021)

Banjir di P.Pinang - Pembangunan tidak terancang, sistem perparitan lemah. [Video] (2017)

Bekalan air: KASA setuju bina takungan air besar di Machang. [Video] (2022)

Bencana banjir; sistem perparitan tersumbat antara punca. [Video] (2021)

Berita Pagi: ladang solar terapung di Kelantan. [Video] (2021)

Bicara pengguna: solar jimat dan menguntungkan. [Video] (2019)

Bingkisan Sabah: tenaga solar Tanjung Labian. [Video] (2016)

Biofuel mampu ganti bahan api fosil – miliki potensi besar pasaran dunia. [Video] (2019)

Biz Malaysia - kejayaan Malaysia dalam industri aeroangkasa. [Video] (2016)

Biz Malaysia- minyak masak biodiesel. [Video] (2016)

Cerita Pagi Johor: UiTM menjana tenaga solar dalam mencapai tahap neutral karbon. [Video] (2022)

Cerita Pagi Perlis - pembangunan teknologi solar photovoltaic. [Video] (2022)

Cerita pagi selangor - program semarak membaca Selangor. [Video] (2021)

DBKL peruntuk RM88 juta untuk sistem perparitan dan pam banjir. [Video] (2015)

Diesel Euro 5 | ganti diesel euro 2M mulai hari ini. [Video] (2021)

Fasiliti Terbesar Dunia – jana kuasa elektrik solar PV. [Video] (2018)

Galak pemasangan solar 'tenaga boleh diperbaharui'. [Video] (2018)

Green Tech Malaysia sasar 300 stesen pengecas elektrik. [Video] (2016)

Green age solar. [Video] (2011)

Harapan terhadap RMKE -11: kejuruteraan & aeroangkasa sektor penting pada masa depan. [Video] (2018)

Hari Air Sedunia 2021: KASA fokus kebersihan sungai, sumber air utama. [Video] (2021)

Hospital Langkawi guna tenaga solar – jimat bil letrik hingga RM360, 000 setahun. [Video] (2017)

Industri aeroangkasa Malaysia terbaik di Asia Tenggara. [Video] (2019)

Industri aeroangkasa negara: sasar pendapatan RM55.2 bilion menjelang 2030. [Video] (2018)

Industri aeroangkasa – Malaysia ingin jadi peneraju di Asia Tenggara. [Video] (2018)

Infografik sisa pepejal di Malaysia. [Video] (2021)

Inovasi aeroangkasa Malaysia. [Video] (2021)

Inovasi empangan Mini-Hydro Elektrik dari Tambunan Sabah. [Video] (2013)

Inovasi kereta solar & hidrogen pelajar uitm. [Video] (2020)

Inovasi | UPM berjaya cipta pes nanotiub karbon. [Video] (2022)

Johor sedia terajui penghasilan biodiesel. [Video] (2016)

KASA bantu selesai masalah air melalui projek TAPS Jernih & Melaka. [Video] (2020)

KDEB Waste Management: pertama guna plastik sampah biodegradasi. [Video] (2018)

KPM dalam proses lengkapkan kemudahan solar hibrid. [Video] (2020)

Kaedah hijau neutral pencemaran ammonia dalam air sungai. [Video] (2016)

Kajian pembinaan sistem solar terapung mampu jana lebih 150 megawatt. [Video] (2022)

Kempen MyButterflyEffect - inisiatif Malaysia terajui penjanaan solar berskala besar. [Video] (2007)

Kempen e-waste bantu kurangkan risiko kesihatan, lestarikan alam sekitar. [Video] (2016)

Kepesatan sektor pertahanan & komersial – MITI antara penggerak sektor aeroangkasa. [Video] (2019)

Keupayaan Malaysia dalam industri aeroangkasa. [Video] (2018)

Kitar semula | 'e-waste' bahayakan kesihatan dan alam sekitar. [Video] (2020)

Kolam takungan dwifungsi: atasi banjir, tingkat rizab margin air di Selangor. [Video] (2022)

Ladang solar terbesar di Malaysia. [Video] (2019)

Lebuh raya Pan Borneo-fasa pertama dijangka siap menjelang 2023. [Video] (2020)

MADA- Sistem Pengairan Tertier dilaksana hujung tahun 2016. [Video] (2016)

MITI-lulus RM100 ribu naik taraf sistem perparitan di Kg Bukit Raja Darat. [Video] (2021)

Malaysia to commercialise 2nd generation biofuels & biojet fuel. [Video] (2021)

Masalah perparitan- punca banjir kilat di Kuala Lumpur. [Video] (2016)

Masalah sistem perparitan tidak sempurna punca banjir. [Video] (2021)

Melaka Biotechnology Corporation 2015. [Video] (2015)

Melaka setuju wujudkan 2 projek Off River Storage. [Video] (2017)

Membaiki sistem pengairan Sungai Kreh - kerajaan persekutuan memperuntukkan 9.5 juta. [Video] (2016)

MoU | UiTM & Malaysian Green Technology Corporation. [Video] (2019)

Mobile e-waste. [Video] (2015)

N5-tenaga solar fotovolta-jimat elektrik dan mesra alam. [Video] (2019)

PPSPM akan tambah baik sistem perparitan & tanam tumbuhan hijau. [Video] (2019)

Pan Borneo: jaringan emas nusantara. [Video] (2022)

Panel solar. [Video] (2021)

Panel solar sumbang 25% penggunaan tenaga kilang. [Video] (2022)

Panorama RTM tv1 biodiesel expedition 2011. [Video] (2011)

Pembinaan Empangan Sabo: dijangka siap hujung tahun ini. [Video] (2022)

Pemeteran tenaga bersih: tenaga solar jimat kadar bil elektrik. [Video] (2019)

Penambahbaikan sistem perparitan-keutamaan pemaju dalam projek perumahan. [Video] (2022)

Pengurusan buangan elektrik dan elektronik. [Video] (2021)

Pengurusan sisa pepejal – KDEB waste guna teknologi pintar. [Video] (2018)

Perparitan sistem – kerja naik taraf dilaksanakan elak banjir. [Video] (2018)

Pesta Buku Antarabangsa KL: berlangsung di PWTC hingga 7 Mei. [Video] (2017)

Pharmaniaga edar ubat paxlovid. [Video] (2022)

Platform Malaysia bukti kemampuan industri aeroangkasa. [Video] (2019)

Program B10 untuk kenderaan diesel bermula 1 Februari 2019. [Video] (2018)

Program robotic science dan technology: tingkat kehadiran murid Orang Asli ke sekolah. [Video] (2022)

Program solar berskala besar oleh industri elektrik Malaysia. [Video] (2020)

Projek Takungan Air Pinggir Sungai tingkatkan takungan air. [Video] (2020)

Projek empangan hidroelektrik Nenggiri. [Video] (2021)

Projek rintis lampu jalan kampung solar led. [Video] (2020)

Projek sistem perparitan utama kawalan banjir. [Video] (2021)

Projek solar: pemangkin pembangunan Kedah Anchor. [Video] (2018)

Projek tenaga solar dan hidro - Long Beruang Baram. [Video] (2015)

Projek tenaga solar terapung: ladang solar terbesar di Asia Tenggara. [Video] (2021)

S4-inisiatif solar fotovolto-galak penjanaan tenaga boleh diperbaharui. [Video] (2020)

SPM - e-waste. [Video] (2021)

Sabtu terakhir setiap bulan sebagai hari e-waste. [Video] (2021)

Sarawak to set up lab to research algae for biofuel production says Premier. [Video] (2022)

Sektor Tenaga: bumbung solar terbesar negara, pacu operasi MHB. [Video] (2021)

Sektor aeroangkasa bakal jana RM30 bilion. [Video] (2021)

Senior Aerospace UPECA – fasiliti aerospace yang pertama. [Video] (2018)

Sistem perparitan perlu ditambah baik. [Video] (2022)

Sistem solar - pemasangan di 4 lokasi Kota Belud dijangka siap akhir julai. [Video] (2016)

Sistem tenaga solar - inisiatif UTM bawa sinar bahawa penduduk Orang Asli. [Video] (2017)

Skim pajakan panel solar jimatkan kos pemasangan dan bil bulanan. [Video] (2022)

Smart waste solution – Selangor jadi perintis. [Video] (2018)

Solar Orang Asli. [Video] (2018)

Stesen janakuasa solar – hasilkan tenaga berkapasiti 18.5 megawatt. [Video] (2018)

Sumber air | sedia lebih banyak TAPS, tangani kemarau besar 2025. [Video] (2022)

Tambah baik sistem perparitan: atasi banjir untuk jangka panjang. [Video] (2022)

Tenaga bersih: projek ladang solar beri manfaat ekonomi, peluang pekerjaaan. [Video] (2021)

Tenaga solar: LSS Sepang TNB pamer prestasi konsisten. [Video] (2021)

Tenaga solar: penglibatan aktif syarikat tempatan diperlukan. [Video] (2019)

Tengku Abdullah mahu sistem perparitan dikaji elak banjir. [Video] (2014)

UPM dan MAB jalin MOU dalam bidang aeroangkasa. [Video] (2020)

UTHM bakal lahir ramai pakar aeroangkasa. [Video] (2020)

Ekonomi | Malaysia tumpu teknologi hijau, sasar negara neutral karbon 2050. [Video] (2021)

Phamplet

How to test the river water's quality? [Phamplet]

Keselamatan elektrik. [Phamplet]

Malaysia`s E&E industry. [Phamplet] (2021)

Malaysia`s aerospace industry. [Phamplet] (2021)

Malaysia’s Petrochemical Industry. [Phamplet]

Malaysia’s green technology. [Phamplet]

Malaysia’s machinery & equipment and engineering supporting industries. [Phamplet]

Manfaat penggunaan baja kompos. [Phamplet]

River hydrology. [Phamplet]

River of life: public outreach programs. [Phamplet]

Website

Alumni UTeM ketua jurutera bangunkan kereta perisai bertaraf dunia. [Website]

Energy minister: buy energy-efficient products, help reduce carbon emissions. [Website]

'Green-mix' concrete: an environmentally friendly building material. [Website] (2015)

Improving the stability of clay for construction. [Website] (2014)

Inisiatif amalan hijau dan aplikasi teknologi hijau PDRM 2014-2015. [Website]

Johor akan jadi pengeluar utama tenaga solar di Asia Tenggara. [Website]

Malaysia auto industry: tapping on new areas of opportunities. [Website]

The Malaysian aerospace industry - soaring to new heights. [Website] (2012)

Malaysia’s solar sector on the rise. [Website] (2019)

Net energy metering 3.0 program (nem 3.0). [Website]

Sarawak wants to assemble EVs, Hydrogen Cars – bets big on renewable energy. [Website]

Shaping a sustainable energy transition. [Website]

Strengthening the electrical and electronics sector. [Website]

Sumbangan SEDA Malaysia dalam tenaga lestari. [Website]

Teknologi hijau. [Website]

The national biofuel policy. [Website]

AWAM for landslide real-time monitoring. [Website]

Pengkomersialan inovasi: jangan 'sampahkan' penyelidikan - Mustafa. [Website] (2022)

Newspaper

12MP: Serba Dinamik ready for aerospace industry challenge. [Newspaper] (2021)

AmBank kurangkan jejak karbon penggunaan elektrik. [Newspaper] (2022)

Aviation, aerospace industry hopes for tech-first policy in Budget 2023. [Newspaper] (2022)

BMAM hopes state government can extend operating hours for construction sites. [Newspaper] (2021)

Bidang geologi jadi tumpuan. [Newspaper] (In Press) (2017)

Bintai Kinden inks partnership with Kejuruteraan Gemilang Jaya to bid for EPCC contract for power import project in Sarawak. [Newspaper] (2021)

Building better homes with modern methods. [Newspaper] (2021)

Construction sector to expand 11.5 per cent in 2022. [Newspaper] (2021)

DBKL, Irrigation Dept to build underground water storage tunnel to overcome flash floods. [Newspaper] (2022)

Declining building materials price comforting, margins improving: MIDF Research. [Newspaper] (2022)

Developing children's interest in coding and robotics. [Newspaper] (2022)

Don’t make Malaysia dumping ground for poor quality products, says minister. [Newspaper] (2019)

Drone technology: taking off from Greater KL. [Newspaper] (2022)

Elak pasaran domestik jadi tempat lambakan produk tidak berkualiti. [Newspaper] (2019)

Engie SA commences operation of Kerian solar project. [Newspaper] (In Press) (2022)

Engineering a landmark future. [Newspaper] (2022)

Enhancing legal metrology through digitalisation. [Newspaper] (2022)

Ensutouch kosmetik enzim nanas hasil penyelidikan. [Newspaper] (2022)

Expert gives thumbs up to Malaysia's flood mitigation measures. [Newspaper] (2017)

Expert: Langat 2 treatment plant will boost water reserves. [Newspaper] (2020)

Floods: electrical engineering lecturers, students, electricians offer free wiring checks for victims. [Newspaper] (2022)

GE, Edra Energy commenced commercial operations of power plant in Alor Gajah. [Newspaper] (2022)

Govt to enhance EV technology through NESTI. [Newspaper] (2021)

Green transport the way forward. [Newspaper] (2019)

Indonesian firms rushing to catch oleochemicals train. [Newspaper] (2014)

Jentayu completes commissioning Malaysia's largest bi-facial solar plant. [Newspaper] (2022)

KAB pasang sistem tenaga PV di Mydin Tunjong. [Newspaper] (2022)

Kenaf composites for automotive components. [Newspaper] (2014)

Kerajaan fokus kembangkan industri oleokimia. [Newspaper] (2022)

Kumbahan mentah mampu hasil gas butanol, etanol. [Newspaper] (2022)

Lynas' proposed PDF construction site to remain in Gebeng, says Dr Adham. [Newspaper] (2021)

MBAM disappointed, not much for construction industry. [Newspaper] (2021)

MOSTI fokus kenderaan elektrik. [Newspaper] (2022)

MRT3 a boon for Malaysian locomotive design & manufacturing specialists. [Newspaper] (2022)

Making solar power accessible. [Newspaper] (2022)

Malaysia aims to be electrical and electronics hub. [Newspaper] (2021)

Malaysia dipilih jadi hab pembuatan peralatan 5G Ericsson. [Newspaper] (2022)

Malaysia hasilkan 100 juta tan biojisim pepejal setahun. [Newspaper] (2015)

Malaysia lokasi solar terbesar Intel di luar AS. [Newspaper] (2021)

Malaysia on track to reach 50pc RE goal by 2050. [Newspaper] (2018)

Malaysia, Japan seek to deepen cooperation in aircraft industry. [Newspaper] (2022)

Malaysia, Jepun perkukuh kerjasama dalam industri pesawat. [Newspaper] (2022)

Malaysian chosen to lead Asia Pacific Legal Metrology grouping. [Newspaper] (2021)

Managing groundwater sustainably. [Newspaper] (2019)

Minetech's earnings ease in Q4, civil engineering division shines. [Newspaper] (2021)

More scope needed to accelerate Malaysia's clean energy adoption. [Newspaper] (2022)

MyHIJAU sharps waste containers used in hospitals nationwide. [Newspaper] (2022)

NAICO pacu pembangunan ekosistem industri aeroangkasa. [Newspaper] (2022)

NST leader: going green by 2040. [Newspaper] (2022)

NTIS powers tech innovation for Malaysia. [Newspaper] (2021)

NanoMalaysia introduces BICEP to promote use of biomass for sustainable agriculture. [Newspaper] (2022)

Petronas chemicals teams up with KDEB waste management, One Biosys on supply of plastic waste. [Newspaper] (2022)

Plus Xnergy deploys solar solutions for Boh Tea. [Newspaper] (2022)

Prestigious award for aspiring petroleum engineers. [Newspaper] (2021)

Producing designers capable of manoeuvring marts. [Newspaper] (2014)

RMK-12: industri aeroangkasa bakal wujudkan 30,000 pekerjaan. [Newspaper] (2021)

Recovery in construction jobs flow. [Newspaper] (2022)

Rehda: do more to address housing matters effectively. [Newspaper] (2022)

Renewable energy push on track. [Newspaper] (2021)

Reservoir Link bags two solar rooftop development contracts. [Newspaper] (2022)

Rising construction costs to lead to an increase in house prices? [Newspaper] (2022)

Rising interest in electric vehicles in Malaysia. [Newspaper] (2022)

River dredging works among measures by Melaka govt to face northeast monsoon season. [Newspaper] (2022)

Robotics for Malaysian students. [Newspaper] (2017)

Scaling EV for future mobility in SEA. [Newspaper] (2022)

Serving the future of electric vehicles in Malaysia. [Newspaper] (2021)

Skim NEM lonjak penggunaan tenaga boleh baharu. [Newspaper] (2022)

Solar ejen pertumbuhan ekonomi. [Newspaper] (2021)

Solid plan needed to mitigate rising construction materials cost. [Newspaper] (2022)

Steep hike in prices of building materials prompts MBAM to call for immediate govt intervention. [Newspaper] (2022)

Step aside Sophia, meet Malaysia's 'first humanoid robot' Adam. [Newspaper] (2019)

TECH: Independence-X Aerospace organises satellite technology challenge. [Newspaper] (2022)

#TECH: NanoMalaysia launches validation programme for local electric vehicle technologies. [Newspaper] (2022)

TECH: Plus Xnergy partners energy firm Yinson to develop rooftop PV solutions in Malaysia. [Newspaper] (2022)

#TECH: Robot that does dishes without breaking. [Newspaper] (2022)

#TECH: Universal robots reveals smaller footprint cobot for Malaysian industries. [Newspaper] (2022)

THHE teams up with SMHB to bolster engineering opportunities, ventures. [Newspaper] (2022)

TNB empowers smart modular technologies to achieve 100 pct renewable energy. [Newspaper] (2022)

TNB pacu peralihan tenaga ke arah kelestarian. [Newspaper] (2022)

TNB subsidiary secures RM185mil financing for solar project in Kedah. [Newspaper] (2022)

TNB'S Jimah East power plant fully operational. [Newspaper] (2019)

TNB's RM12bil power plant adds 2,000MW of electricity to national grid. [Newspaper] (2020)

TNB's coal-fired power plants begin producing electricity. [Newspaper] (2019)

TNB, PETRONAS in joint feasibility studies on hydrogen, carbon capture. [Newspaper] (2022)

Teknologi IR 4.0 kurangkan kos operasi rawatan air. [Newspaper] (2022)

Traffic woes: effective management plans near construction sites needed. [Newspaper] (2022)

Traffic woes: effective management plans near construction sites needed – experts. [Newspaper] (2022)

Transforming solid waste management. [Newspaper] (2020)

UiTM to sample German innovation. [Newspaper] (2022)

Use palm oil as a primary ingredient in soap formulations, MPOB encourages entrepreneurs. [Newspaper] (2022)

Using space remote sensing, MOSTI helps NADMA to analyse soil movement. [Newspaper] (2022)

Value of construction work in Q2 jumps. [Newspaper] (2021)

Volvo Car Malaysia plans to produce first locally-assembled EV in Shah Alam. [Newspaper] (2022)

Advancecon's projects going full-speed. [Newspaper] (2021)

Merdeka 118 pencapaian hebat kejuruteraan negara. [Newspaper] (In Press) (2021)

Enam telco setuju laksana 5G di Malaysia. [Newspaper] (2022)

PM lancar Automative Hi-Tech Valley. [Newspaper] (2022)

The power of algae. [Newspaper] (2018)

Malaysia-AS teroka tenaga solar. [Newspaper] (2021)

Urus sisa pepejal secara mampan, elak alam sekitar terbeban. [Newspaper] (2022)

Waspada dengan bahan kimia. [Newspaper] (2022)

40 per cent of Malaysia's energy supply will be renewable by 2035. [Newspaper] (2022)

Solar energy can improve nation's wellbeing. [Newspaper] (2016)

PAAB allocates RM471 million for water treatment plant projects in Kelantan. [Newspaper] (2022)

TNB aims to accelerate green agenda. [Newspaper] (2022)

Malaysia dalam perancangan peralihan tenaga. [Newspaper] (2021)

Saving energy and environment with electric cars. [Newspaper] (2019)

Siti Juita Mastura aktif cipta dron. [Newspaper] (2021)

Biotechnology sector remains intact. [Newspaper] (2020)

Malaysia's first locally-produced locomotive by SMH Rail ready for export. [Newspaper] (2021)

Rising steel costs to hamper construction targets. [Newspaper] (2021)

Shell Malaysia installs solar panels at 216 retail stations. [Newspaper] (2022)

MPOB cipta teknologi baharu rawat sisa akhir sawit. [Newspaper] (2021)

#TECH: Smart cleaning robot reports for duty at KLIA2. [Newspaper] (2022)

#TECH: iNNOVATE Tech Show 2022 to showcase latest drone technologies. [Newspaper] (2022)

Healthy bio industry. [Newspaper] (2014)

UPM guna sistem solar hasilkan elektrik. [Newspaper] (2022)

Solusi mesra alam guna lalat soldadu hitam. [Newspaper] (2022)

Tapping into groundwater is the way forward, says PM. [Newspaper] (2022)

UMP makes tech leaps with society in mind. [Newspaper] (2022)

NextGreen inks MoU to set 20 collection centres for palm oil waste. [Newspaper] (2022)

Boustead, Next Gen to develop algae plantation, produce carbon neutral crude algae oil. [Newspaper] (2021)

China's EVE Energy to build US$422.3mil battery plant in Malaysia. [Newspaper] (2022)

HSS engineers to undertake feasibility study to upgrade Johor water treatment system. [Newspaper] (2022)

Headwinds in building materials price not huge risk for construction sector: MIDF Research. [Newspaper] (2022)

Huawei to help Malaysia's Apollo to develop new EVs. [Newspaper] (2022)

MNHB well positioned to win some large-scale solar projects. [Newspaper] (2022)

Malakoff to build & operate solar energy system at Senai Airport. [Newspaper] (2022)

Pestech International inks MoU with Hydrogène De France for green hydrogen production. [Newspaper] (2022)

Petronas, Aerodyne team up to commercialise drone-based solutions. [Newspaper] (2022)

TNB unveils world's first power plant with most efficient gas turbine by GE. [Newspaper] (2022)

Turkish Aerospace opens first engineering, design office in Southeast Asia in Malaysia. [Newspaper] (2021)

Huge potential in electric vehicles. [Newspaper] (In Press) (2022)

Time to invest in electronics and EV market. [Newspaper] (2021)

We need to join the race before it's too late. [Newspaper] (2021)

AFES leads the way in sustainable waste management. [Newspaper] (2020)

Perkukuh solidariti kejuruteraan biomedikal hadapi cabaran baharu. [Newspaper] (2021)

Landasan tepat. [Newspaper] (2022)

Malaysia berpotensi jadi hab pusat data di ASEAN. [Newspaper] (2022)

Better healthcare with nanotech. [Newspaper] (2014)

Biodiesel sawit sumber tenaga mesra alam. [Newspaper] (2019)

Malaysia's aerospace sector growing faster, players hope budget support momentum. [Newspaper] (2022)

Push for more local aerospace players. [Newspaper] (2022)

Use oil palm biomass as feedstock for "green" jet fuel: Transport Minister. [Newspaper] (2022)

A head start in the oil and gas industry. [Newspaper] (2017)

Malaysia targeting 40 per cent renewable energy by 2035. [Newspaper] (2022)

Tarik minat dunia automotif. [Newspaper] (2022)

Soft soil requires ground improvement before construction. [Newspaper] (2018)

UiTM terima perisian kejuruteraan kimia daripada Schlumberger. [Newspaper] (2020)

How oleochemicals production is contributing to the palm oil industry. [Newspaper] (2019)

Why palm biodiesel is more important than you thought? [Newspaper] (2019)

Big groundwater projects can impact environment. [Newspaper] (2022)

Bridges built to withstand floods. [Newspaper] (2022)

Consultant to study proposed KL underground water storage to be appointed. [Newspaper] (2022)

Energy Commission studying potential power storage to complement existing power grids. [Newspaper] (2022)

PM: Malaysia to be positioned as biomass hub. [Newspaper] (2022)

Revised renewable energy quota sees new potentials being explored. [Newspaper] (2022)

Construction industry records RM42 billion in losses since last year. [Newspaper] (2021)

Bukit Kukus soil structure not appropriate for development, says expert. [Newspaper] (2018)

Bukit Kukus water retention: MBPP orders engineering consultant to come up with solution. [Newspaper] (In Press) (2022)

Explore groundwater as alternative water source during dry season, urges Forum Air Malaysia. [Newspaper] (2022)

Roket pertama diterbangkan penuntut universiti. [Newspaper] (2022)

B20 is the better fuel. [Newspaper] (2020)

Investing in Malaysia's oleochemicals. [Newspaper] (2022)

Progressture solar plans RM200mil investment. [Newspaper] (2022)

Seng Fong move towards utilising renewable energy sources. [Newspaper] (2022)

Petronas says soil movement caused SSGP pipeline leak. [Newspaper] (2022)

Sisa biomas industri sawit jadi sumber tenaga baharu. [Newspaper] (2022)

Kerjaya jurutera wanita lasak setanding lelaki. [Newspaper] (In Press) (2022)

Impak teknologi hijau. [Newspaper] (2022)

Teori, praktikal seiring. [Newspaper] (2022)

Tingkat kelajuan jalur lebar. [Newspaper] (2022)

Tumpu kelestarian alam. [Newspaper] (2022)

Malaysia ketiga dunia hab tenaga solar. [Newspaper] (2019)

Proton lancar inisiatif tenaga solar, jimat bil elektrik RM4.39j setahun. [Newspaper] (2022)

TNB tingkat hala tuju kelestarian dengan ladang angin luar pesisir. [Newspaper] (2022)

Construction industry needs to embrace new technologies. [Newspaper] (2015)

Biotechnology aids palm oil. [Newspaper] (2021)

Biotechnology, a new way forward. [Newspaper] (2015)

PM lancar lembah automotif berteknologi tinggi tanjung malim. [Newspaper] (2022)

Universiti perlu tingkat fungsi jadi pusat penyelidikan - Noraini. [Newspaper] (2022)

#TECH: NEC bullish about demand for biometric authentication technology solutions. [Newspaper] (2022)

#TECH: can Malaysia make an impact in the space tech industry? [Newspaper] (2022)

TECH: can Malaysia make an impact in the space tech industry? [Newspaper] (2022)

TECH: making solar energy affordable. [Newspaper] (2022)

Cipta minyak kapal terbang daripada sisa sawit. [Newspaper] (2022)

Teknologi lightboard mudahkan pengajaran dalam talian. [Newspaper] (2020)

Reneuco, Kedah MBI to jointly develop green energy projects. [Newspaper] (2022)

SMTrack inks project management agreement for O&G safety product purchase. [Newspaper] (2022)

Solarvest unveils first RE fintech platform in Malaysia. [Newspaper] (2022)

Strengthening Malaysia's construction sector. [Newspaper] (2022)

TNB, Petronas explore hydrocarbon & carbon capture ventures to unlock RM10bil prospect. [Newspaper] (2022)

Rehda will continue to offer quality, affordable homes, despite rising building material costs and a labour shortage. [Newspaper] (2022)

A bulk of the construction projects completed this year include residential and non-residential buildings, says DoSM. [Newspaper] (2022)

Berjaya jimatkan tenaga RM26.2 juta setahun. [Newspaper] (2022)

Sunny side up. [Newspaper] (2022)

Johor taps idle land for biotech projects. [Newspaper] (2014)

Socar, TNB collaborate on EV adoption data. [Newspaper] (2021)

Toyota officially launches Veloz, already has 6,000 bookings. [Newspaper] (In Press) (2022)

Engineering and construction sector struggling and in need of support. [Newspaper] (2020)

Widening roads costly, says expert. [Newspaper] (2019)

Littering, not plastic, harms environment. [Newspaper] (2016)

Towards greener farming with biogas power plant. [Newspaper] (2022)

Perluas sistem solar PV bantu penjimatan bil elektrik rakyat. [Newspaper] (2022)

New national car project will give automotive sector a jump-start: Dr M. [Newspaper] (2018)

Managing flood problems. [Newspaper] (2019)

Beri pendedahan awal budaya teknologi hijau. [Newspaper] (2022)

More markets to be equipped with robo-tech. [Newspaper] (2021)

TTES Frontken peneraju kejuruteraan peralatan berputar sektor minyak dan gas. [Newspaper] (2022)

Collins Aerospace perkukuh operasi MRO di Malaysia. [Newspaper] (2022)

Kilang PROTON Tanjung Malim manfaat tenaga solar. [Newspaper] (2022)

Malaysia mampu jadi pengeluar utama hidrogen hijau. [Newspaper] (2022)

TNB, UTHM jalin kerjasama projek solar. [Newspaper] (2021)

Dua insiden pencemaran sungai dikesan minggu ini. [Newspaper] (2022)

Bolstering Malaysia's aerospace sector via 12MP. [Newspaper] (2021)

Why we need to shift to bioplastics. [Newspaper] (2021)

Inovasi mesin cetakan baju tempatan. [Newspaper] (2022)

On the road to nanotechnology implementation. [Newspaper] (2022)

A man-made disaster waiting to happen. [Newspaper] (2022)

Kitar semula e-sisa kerana ada logam berharga. [Newspaper] (2022)

Pilih kaedah rawatan air sesuai. [Newspaper] (2022)

Belajar kejuruteraan automotif menerusi kereta nasional ketiga. [Newspaper] (2019)

Rancang jual elektrik jana pendapatan masjid. [Newspaper] (2022)

Urus sisa makanan dengan baik untuk kelestarian alam. [Newspaper] (2021)

Satelit kelapan negara dilancar ke orbit dari Kourou. [Newspaper] (2022)

Rise of the machines: is Malaysia ready? [Newspaper] (2017)

Time to embrace renewable energy. [Newspaper] (2022)

Harnessing ocean resources for sustainable energy transitions. [Newspaper] (2022)

Kerajaan disaran bina sistem aliran air bawah tanah dari empangan. [Newspaper] (2022)

CAAM to introduce system to monitor drone flight activities. [Newspaper] (2022)

Manfaat teknologi amaran awal banjir selamatkan mangsa. [Newspaper] (2022)

Solar power's decade of falling costs is thrown into reverse. [Newspaper] (2021)

Engineering future challenges. [Newspaper] (2017)

Saiful Hakimi makes Malaysia proud. [Newspaper] (2019)

MOSTI tawar kepakaran, teknologi atasi isu sekuriti makanan. [Newspaper] (2022)

MPOB, UPSI meterai kerjasama kepakaran penyelidikan. [Newspaper] (2022)

Microalgae a new potential to mitigate carbon footprint. [Newspaper] (2021)

Bakal jurutera perlu proaktif persiap diri manfaatkan IR 4.0. [Newspaper] (2021)

#TECH: making cities smart. [Newspaper] (2021)

#TECH: trading energy among peers. [Newspaper] (2021)

'Malaysia must beef up biotech expertise'. [Newspaper] (2020)

Committed to enhancing connectivity. [Newspaper] (2021)

Govt looking at integrated river basin management to manage floods. [Newspaper] (2022)

National biotech policy gears up for crucial phase. [Newspaper] (2016)

Malaysian space agency shoots for the stars. [Newspaper] (2022)

Grooming engineers for smart manufacturing. [Newspaper] (2019)

Harvesting solar energy on water. [Newspaper] (2018)

Solar energy for greener Penang. [Newspaper] (2022)

With right methods, concrete structures last. [Newspaper] (2019)

Jurutera tempatan perlu pelajari teknologi selenggara perkhidmatan pengangkutan awam. [Newspaper] (2022)

Kemaman flood management system, wins award in Geneva. [Newspaper] (2016)

Use science, data to mitigate floods. [Newspaper] (2021)

Kepentingan bidang kejuruteraan perisian. [Newspaper] (2020)

Selangor pertingkat penggunaan dron pantau pencemaran sungai. [Newspaper] (2022)

Electricity tariff hike inevitable as fuel costs increase. [Newspaper] (2022)

Biomas sektor ekonomi baru. [Newspaper] (2019)

Mengurus sisa sifar secara lestari. [Newspaper] (2018)

SEB to phase out Sejingkat power plant. [Newspaper] (2022)

More awareness needed on chemical danger in varsity labs. [Newspaper] (2021)

Renewable energy powered by waves. [Newspaper] (2014)

150 construction sites ordered to cease operation. [Newspaper] (2021)

Bina Puri to build its first power plant in Malaysia. [Newspaper] (2021)

CTRM weighs in on encouraged demand for aircraft globally. [Newspaper] (2018)

Collins Aerospace expands MRO facilities in Malaysia. [Newspaper] (2022)

Strand Aerospace focuses on design-and-build capability. [Newspaper] (2019)

TH Heavy Engineering, MTD Capital to jointly explore civil engineering, construction jobs under 12MP. [Newspaper] (2021)

TNB to develop 300MW hydroelectric power plant in Kelantan. [Newspaper] (2021)

Timely jolt needed for EV industry. [Newspaper] (2022)

Same 5G frequencies cause aviation interference? [Newspaper] (2022)

Newly-officiated power plant part of Yan development project, says Dr Wee. [Newspaper] (2022)

Federal Power hasilkan bateri solar tahun hadapan. [Newspaper] (2020)

Malaysian solves lightning problem. [Newspaper] (2018)

Perbandaran lestari terbesar di Malaysia guna sistem PV. [Newspaper] (2021)

S P Setia pasang solar PV di semua projek rumah. [Newspaper] (2022)

Shell Malaysia pasang panel solar di 216 stesen. [Newspaper] (2022)

Manjung 4 plant powered up. [Newspaper] (2018)

Inovasi rumah solar ikan masin. [Newspaper] (2021)

Perluas hebahan manfaat tenaga solar. [Newspaper] (2022)

JPS jemput pakar, kenal pasti kawasan hakisan. [Newspaper] (2022)

Beware of Earth's tolerance limit. [Newspaper] (2022)

Sea of 'kemeling' draws visitors to Sungai Petani oxidation pond. [Newspaper] (2021)

Tamak punca pencemaran alam sekitar. [Newspaper] (2018)

Lynas helps M'sia become industry leader in rare earth processing. [Newspaper] (2020)

This list was generated on Sat May 4 23:11:16 2024 +08.